UBM80 UNIVERSAL Power clamps UB = UNIVERSAL Power clamps fully adjustable opening angle: 0° to 135° Max M = Pneumatic with manual lever The opening angle range may vary according to the arm position and style = Central, 20 mm offset (standard) N = No sensor = Right, 20 mm offset (standard) (with protection plate) = Left, 20 mm offset (standard) E = Electronic sensor with M12 = Central, 45mm offset swivel connector = Right, 45mm offset = Left, 45mm offset = No arm = Central, oversized dowel holes Ø 8 H7, 20 mm offset = Right, oversized dowel holes Ø 8 H7, 20 mm offset = Left, oversized dowel holes Ø 8 H7, 20 mm offset Double arm version available UBM80ODPE - UBM80VDPE UNIVER GROUP

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp with manual lever arm at 45 mm from pivot point (arm style E-L-F) MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp with manual lever MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp with manual lever arm at 45 mm from pivot point (arm style E-L-F) MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp with manual lever (arm style X-Y-Z) MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp with manual lever MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice