UBH40 UNIVERSAL Power clamps UB = UNIVERSAL Power clamps fully adjustable opening angle: 0° to 135° Max The opening angle range may vary according to the arm position and style UNIVER GROUP = Central, 15 mm offset N = No sensor = Right, 15 mm offset (with protection plate) = Left, 15 mm offset E = Electronic sensor with M12 = Central, 45 mm offset swivel connector = Right, 45 mm offset D = Pneumatic sensor = Left , 45 mm offset = No arm = Central, oversized dowel holes Ø 8 H7, 15 mm offset = Right, oversized dowel holes Ø 8 H7, 15 mm offset = Left, oversized dowel holes Ø 8 H7, 15 mm offset

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 125° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT *** : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modification without notice.

UNIVERSAL Pneumatic clamp arm at 45 mm from pivot point MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modification without notice.

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modification without notice.

UNIVERSAL Pneumatic clamp arm at 45 mm from pivot point Min./Max. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 125° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90' Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modification without notice.