*mydirectindustry

Catalogs
UNIVER Group
PRP0050_Marking units

PRP0050_Marking units

Product catalog summary

Overview: This document provides technical specifications for the UNIVER GROUP's automotive marking units, specifically the PRP0050 model.

Specifications:

Series: PRP (Marking units)
Model: 0050
Torque: 420 Nm
Cylinder Diameter: Ø 63 mm tandem cylinder
Opening Angles: 44 mm (04) and 74 mm (07)
Fixed Opening Angle: 75°

Mounting and Connections:

Marketing Head Mounting Position: Not specified, defaults to sensor side
Front Side: If not specified, defaults to sensor side

Progressive Numbering: Special products are assigned progressive numbers by the Sales department.

Catalog excerpts

PRP = Marking units 0050 = 420 Nm 0 63 mm tandem cylinder 04 = 44 mm 4 Opening angles 5 Marketing head mounting position 75 =75° fixed opening angle M = on the moving part Progressive numbers for special = if not specified, on sensor side

Open the catalog to page 1

- Min./Max. operating pressure: 0,4 / 0,6 MPa - Possibility to orientate the marking surface - Pneumatic ports on both sides - Eletronic 24 Vdc sensor with M12 swivel connector that can be * : SPACE FOR OPENING ANGLE ADJUSTMENT orientated at 0° or 90° Subject to technical modifications without notice.

Open the catalog to page 2

Marking Unit - Min./Max. operating pressure: 0,4 / 0,6 MPa - Possibility to orientate the marking surface - Pneumatic ports on both sides - Eletronic 24 Vdc sensor with M12 swivel connector that can be * : SPACE FOR OPENING ANGLE ADJUSTMENT orientated at 0° or 90° Subject to technical modifications without notice.

Open the catalog to page 3

PRP0050_Marking units

PRP0050_Marking units

Catalog excerpts

All UNIVER Group catalogs and technical brochures