*mydirectindustry

Catalogs
UNIVER Group
PRP0025_Marking units

PRP0025_Marking units

Product catalog summary

Specifications:
The document outlines the specifications for a marking unit with the model number PRP0025. It features a 250 Nm torque and a 63 mm diameter cylinder. The opening angle is adjustable to 105°.

Procedures:
Progressive numbering is used for special products, which are assigned by the Sales department. The document specifies the mounting position of the marketing head and the connections, indicating that if not specified, connections are on the sensor side.

Norms and Recommendations:
The document does not explicitly mention norms or recommendations but implies standard procedures for assigning progressive numbers and mounting positions.

Key Data:
- Series: PRP
- Size: 0025
- Cylinder Diameter: 63 mm
- Torque: 250 Nm
- Opening Angle: 105° adjustable
- Mounting Position: Specified by marketing head
- Connection Side: Sensor side if unspecified

Critical Information:
Ensure that the mounting position and connection side are clearly specified to avoid installation errors. The Sales department is responsible for assigning progressive numbers for special products.

Catalog excerpts

1 Series PRP = Marking units 4 Opening angles OR = 105° adjustable 6 Progressive numbering Progressive numbers for special products are assigned by the Sales dept. UNIVER GROUP 5 Marketing head mounting position M = on the moving part F = on the fixed part 7 Connections _ = if not specified, on sensor side F = front side

Open the catalog to page 1

Marking Unit - Min./Max. operating pressure: 0,4 / 0,6 MPa - Adjustable opening angle from 10° to 105° - Possibility to orientate the marking surface - Pneumatic ports on both sides - Eletronic 24 Vdc sensor with M12 swivel connector that can be * : SPACE FOR OPENING ANGLE ADJUSTMENT orientated at 0° or 90° Subject to technical modifications without notice.

Open the catalog to page 2

PRP0025_Marking units

PRP0025_Marking units

Catalog excerpts

All UNIVER Group catalogs and technical brochures