*mydirectindustry

Catalogs
UNIVER Group
LSLG_Pin clamp with hand lever

LSLG_Pin clamp with hand lever

Product catalog summary

Specifications:
The document outlines specifications for a pin clamp with a hand lever, identified by the series version codes 'LS' for pin clamp and 'L' for hand lever. The model includes options for locating pins and electronic sensors with M12 swivel connectors.

Procedures:
Progressive numbering is used for special products, assigned by the Sales Department. The working height and pin diameter are specified, with options ranging from Ø 19 mm to Ø 40 mm.

Norms and Recommendations:
The document specifies that the standard locating pin is not included unless requested, and other specifications can be customized upon request. The electronic sensor option is available for enhanced functionality.

Key Data:
The document includes a table indicating pin diameters and corresponding codes, ranging from 1 for Ø 19 mm to 6 for Ø 40 mm. The 'G' code refers to a UNIVER drawing, and 'U' indicates the presence of an electronic sensor.

Catalog excerpts

LSLG Pin clamp with hand lever 4 Sensor U = Electronic sensor with 7 Working height 0 = Standard, others upon request UNIVER GROUP 2 Version L = With hand lever 3 Model G = UNIVER drawing 6 Locating pin 0 = Locating pin non included 1 = Locating pin included 8 Progressive numbering Progressive numbers for special products are assigned by the Sales Dept.

Open the catalog to page 1

UNIVERSAL Pneumatic pin clamp Missing dimension to be defined according to customer specifications MinVMax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

Open the catalog to page 2

Missing dimension to be defined according to customer specifications MinVMax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orienlated at0°or90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

Open the catalog to page 3

All UNIVER Group catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list