LCR63 Pneumatic retractable locating pin unit, compact hand-caps, single rod 2 Version R = Pneumatic, compact hand-caps, single rod LC = Retractable locating pin unit N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector E = East, standard O = West R = Stainless steel rod scraper 6 Rod end style A = Rod for off-set pins B = Rod with profiled end C = Rod with cross-profiled end inner Ø 16 mm D = Rod for off-set pins with oversized dowel holes E = Rod with cross-profiled end inner Ø 10 mm F = Rod for side mounting H = Rod with flat end, inner Ø 10 mm I = Rod with flat end, inner Ø 12 mm L = Rod with 12 mm hole compatible with CNOMO LCG M = Rod with 20 mm hole compatible with CNOMO LCG Only with A and D rod end style UNIVER GROUP

UNIVERSAL Pneumatic retractable locating pin unit NORTH WEST SOUTH Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides ': TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit with rod's inner diameter 010 mm MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides ': TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit with rod's inner diameter 010 mm MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit with rod's inner diameter 010 mm MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides ': TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.