LCM50 Pneumatic retractable locating pin unit with hand lever, single rod 1 Series LC = Retractable locating pin unit 7 Rod orientation E = east, standard 2 Version P = Pneumatic with hand lever, single rod 5 Sensor D = Pneumatic sensor with double air supply N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector 6 Rod end style A = Rod for off-set pins B = Rod with profiled end C = Rod with cross-profiled end inner Ø 16 mm D = Rod for off-set pins with oversized dowel holes E = Rod with cross-profiled end with inner Ø 10 mm F = Rod for side mounting H = Rod with flat end, inner Ø 10 mm I = Rod with flat end, inner Ø 12 mm L = Rod with 12 mm hole compatible with CNOMO LCG M = Rod with 20 mm hole compatible with CNOMO LCG R = Rod scraper in stainless steel O = west N = north S = south Only with A and D rod end styles UNIVER GROUP

UNIVERSAL Pneumatic retractable locatinq pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSAL Pneumatic retractable locating pin unit MinVmax. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.