Catalog excerpts
LCL50 Retractable locating pin unit with hand lever, single rod 2 Version L = With hand lever, single rod LC = Retractable locating pin unit N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector E = east, standard O = west N = north R = Rod scraper in stainless steel 6 Rod end style A = Rod for off-set pins B = Rod with profiled end C = Rod with cross-profiled end inner Ø 16 mm D = Rod for off-set pins with oversized dowel holes E = Rod with cross-profiled end inner Ø 10 mm F = Rod for side mounting H = Rod with flat end, inner Ø 10 mm I = Rod with flat end, inner Ø 12 mm L = Rod with 12 mm hole compatible with CNOMO LCG M = Rod with 20 mm hole compatible with CNOMO LCG Only with A and D rod end styles UNIVER GROUP
Open the catalog to page 1UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 2UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 3UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 4UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 5UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 6UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 7UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 8UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 9UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 10UNIVERSAL Pneumatic retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.
Open the catalog to page 11All UNIVER Group catalogs and technical brochures
-
JLE
5 Pages
-
HZRS
2 Pages
-
MP Clamping cylinders
3 Pages
-
AC-N NAMUR valve
2 Pages
-
HZ9N
1 Pages
-
HE/HF tubes
1 Pages
-
LAE140 Electric power clamps
4 Pages
-
Modular Tooling System - GR8
52 Pages
-
PRODUCT RANGE
44 Pages
-
ATEX PRODUCT RANGE
14 Pages
-
NEWS 2017-2018
32 Pages
-
NEWS 2016
16 Pages
-
PRODUCT OVERVIEW
228 Pages
-
Product range
44 Pages
-
ATEX Certified products
14 Pages
-
NEWS 2017
32 Pages
-
Valves
210 Pages
-
UBH40_UNIVERSAL Power clamps
6 Pages
-
PRODUCT RANGE
32 Pages
-
LAGP605_Pneumatic power pivot
13 Pages
-
LAGP600_Pneumatic power pivot
13 Pages
-
LAGP350_Pneumatic power pivot
13 Pages
-
LAGP300_Pneumatic power pivot
13 Pages
-
LAGP210_Pneumatic power pivot
13 Pages
-
LAGP170_Pneumatic power pivot
13 Pages
-
LAGP155_Pneumatic power pivot
13 Pages
-
LAGP150_Pneumatic power pivot
13 Pages
-
LAGP120_Pneumatic power pivot
13 Pages
-
LAGP080_Pneumatic power pivot
13 Pages
-
LAGP075_Pneumatic power pivot
13 Pages
-
PRP1100_Marking units
3 Pages
-
PRP0500_Marking Units
4 Pages
-
PRP0050_Marking units
3 Pages
-
PRP0025_Marking units
2 Pages
-
LGP40_ Pneumatic Grippers
7 Pages
-
LGP32_ Pneumatic Grippers
7 Pages
-
LUP63_Pneumatic pin clamp
2 Pages
-
LSP60_Pneumatic pin clamp
3 Pages
-
LSP50U_Pneumatic pin clamp
3 Pages
-
LSP32_Pneumatic pin clamp
3 Pages
-
IBM40_UNIVERSAL Power clamps
6 Pages
-
IBP40_UNIVERSAL Power clamps
6 Pages
-
UBH63_UNIVERSAL Power clamps
6 Pages
-
UBM40_UNIVERSAL Power clamps
6 Pages
-
UBM50_UNIVERSAL Power clamps
10 Pages
-
UBM63_UNIVERSAL Power clamps
10 Pages
-
UBM80_UNIVERSAL Power clamps
10 Pages
-
UBP32_UNIVERSAL Power clamps
4 Pages
-
UBP50_UNIVERSAL Power clamps
6 Pages
-
UBP63_UNIVERSAL Power clamps
6 Pages
-
UBP80_UNIVERSAL Power clamps
8 Pages
-
UBQ40_UNIVERSAL Power clamps
8 Pages
-
UBQ63_UNIVERSAL Power clamps
6 Pages
-
UBT40_UNIVERSAL Power clamps
6 Pages
-
AUTOMOTIVE DIVISION
24 Pages
-
RISERS
4 Pages
-
LGP32-40 Pneumatic Grippers
16 Pages
-
GR8-Modular Tooling System
44 Pages
-
M series
1 Pages
-
Product Overview
228 Pages
-
POWER PIVOTS
2 Pages
-
PIN CLAMPS
2 Pages
-
CLAMPS
2 Pages
-
ACCESSORIES
54 Pages
-
AIR TREATMENT
14 Pages
-
HIGH TECH
75 Pages
-
CYLINDERS
67 Pages
-
KE_Cylinders according to ISO 15552
10 Pages
-
HZE_Additional components
4 Pages
-
HZE_Air treatment units
14 Pages
-
L1/L6_Locking unit for cylinders
6 Pages
-
HZE_Air treatment units
12 Pages
-
fittings
36 Pages
-
PS_COMBOBOX valves
12 Pages
-
AI_Miniature limit switches
4 Pages
-
CH_2/2 - 3/2 G1/8 poppet valves
4 Pages
-
A_15 mm Microvalves
6 Pages
-
B10_Nanovalvole 10 mm ISO 15218
2 Pages
-
OV_Oval cylinders Ø 18-80 mm
5 Pages
-
BE/BE12_ISO 5599/1 Valves
12 Pages
-
Rodless cylinders Ø 16-50 mm
12 Pages
-
Rotary actuators Ø 32-125 mm
3 Pages