LCJ50 Pneumatic retractable locating pin unit, higher traction force, single rod LC = Retractable locating pin unit P = Pneumatic-standard, higher traction force, single rod 7 Rod orientation E = east, standard D = Pneumatic sensor with double air supply N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector 6 Rod end style A = Rod for off-set pins B = Rod with profiled end C = Rod with cross-profiled end inner Ø 16 mm D = Rod for off-set pins with oversized dowel holes E = Rod with cross-profiled end inner Ø 10 mm F = Rod for side mounting H = Rod with flat end, inner Ø 10 mm I = Rod with flat end, inner Ø 12 mm L = Rod with 12 mm hole compatible with CNOMO LCG M = Rod with 20 mm hole compatible with CNOMO LCG R = Stainless steel rod scraper O = west N = north S = south Only with A and D rod end styles UNIVER GROUP

UNIVERSAL Retractable locating pin unit with improved pull force NORTH WEST SOUTH Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Retractable locating pin unit with improved pull force Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Retractable locating pin unit 016H7 with improved pull force Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Retractable locating pin unit with improved pull force NORTH WEST SOUTH Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at0°or90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Retractable locating pin unit with improved pull force Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Retractable locating pin unit with improved pull force Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Retractable locating pin unit with improved pull force Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at0°or90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Retractable locating pin unit with improved pull force Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at0°or90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

UNIVERSAL Retractable locating pin unit Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.

35 UNIVERSAL Retractable locating pin unit 020 H7 I' 1 with improved pull force Min./max. operating pressure: 0,4 / 0,6 MPa Electronic sensor with M12 swivel connector that can be orientated at0°or90° Pneumatic ports on both sides : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modification without notice.