*mydirectindustry

Catalogs
UNIVER Group
LAGP600_Pneumatic power pivot

LAGP600_Pneumatic power pivot

Product catalog summary

Overview: This document provides technical specifications for the LAGP600 series, a pneumatic power pivot system used in automotive applications. It details the components, configurations, and options available for customization.

Specifications:

Series: LAG - Power pivot with predetermined pivot rotation angles.
Type: P - Pneumatic-standard with a 600 = Ø 200 mm cylinder.
Pivot Rotation Angles: Options include 120°, 90°, 60°, and 45°.
Sensor Options: Electronic sensors with M12 swivel connectors, with an additional option for brake condition detection.

Configurations:

Table Position: Vertical (180°), Horizontal (90°), Vertical mirror of V position (max opening angle 120°), Horizontal mirror of O position (max opening angle 60°).
Brake System: Available with or without a brake.
Valve Connections: Integrated valve for cycle time optimization.
Sensor Position: Options for left side, right side, front side, or rear side relative to the sensor.

Key Features:

Predetermined pivot rotation angles for precise control.
Customizable sensor and brake options for enhanced functionality.
Integrated valve for improved cycle time efficiency.

Catalog excerpts

LAGP600 Pneumatic power pivot LAG = Power pivot with predeterminate pivot rotation angles E = Electronic sensor with M12 swivel connector A = Electronic sensor with M12 swivel connector + electronic sensor for brake condition detection V = Vertical 180° O = Horizontal 90° Z = Vertical, mirror of V position Max opening angle 120° P = Horizontal, mirror of O position Max opening angle 60° 7 Brake system B = With brake W = Without brake UNIVER GROUP 6 Pivot rotation angles 8 Valve C = Integrated valve for cycle time optimization 9 Connections _ = If not specified, on the left side (sensor left side) D = Right side (sensor right side) F = Front side (in front of the sensor) P = Rear side (same side as sensor)

Open the catalog to page 1

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 2

Pneumatic power pivot Passive brake * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 3

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 4

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 5

UNIVERSAL Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 6

UNIVERSAL Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 7

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 8

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 9

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 10

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 11

Open the catalog to page 12

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 13

LAGP600_Pneumatic power pivot

LAGP600_Pneumatic power pivot

Catalog excerpts

All UNIVER Group catalogs and technical brochures