Series 2 Version 3 Size LAG = Power pivot with P = Pneumatic-standard 300 = 0 160 mm cylinder predeterminate pivot rotation Table position 6 Pivot rotation angles Z = Vertical, mirror of V position P = Horizontal, mirror of 0 position E = Electronic sensor with Ml 2 swivel connector A= Electronic sensor with Ml 2 electronic sensor for brake condition detection B = With brake C = Integrated valve for cycle time _ = If not specified, on the left side W= Without brake optimization (sensor left side) D = Right side (sensor right side) F = Front side (in front of the sensor) P = Rear side (same side as sensor)

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90" -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° - 90° -120" Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

UNIVERSAL Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot Passive brake * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Pneumatic power pivot Passive brake * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60" Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.