LAGP210_Pneumatic power pivot
13Pages

{{requestButtons}}

Catalog excerpts

LAGP210_Pneumatic power pivot - 1

LAGP210 Pneumatic power pivot C = Integrated valve for cycle time optimization 6 Pivot rotation angles E = Electronic sensor with M12 swivel connector A = Electronic sensor with M12 swivel connector + electronic sensor for brake condition detection V = Vertical 180° O = Horizontal 90° Z = Vertical, mirror of V position Max opening angle 120° P = Horizontal, mirror of O position Max opening angle 60° UNIVER GROUP LAG = Power pivot with predeterminate pivot rotation angles B = With brake W = Without brake 9 Connections _ = If not specified, on the left side (sensor left side) D = Right side (sensor right side) F = Front side (in front of the sensor) P = Rear side (same side as sensor) Automotive NW_Rev.

Open the catalog to page 1
LAGP210_Pneumatic power pivot - 2

Pneumatic power pivot Passive brake * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 2
LAGP210_Pneumatic power pivot - 3

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 3
LAGP210_Pneumatic power pivot - 4

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 4
LAGP210_Pneumatic power pivot - 5

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 5
LAGP210_Pneumatic power pivot - 6

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 6
LAGP210_Pneumatic power pivot - 7

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60" Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 7
LAGP210_Pneumatic power pivot - 8

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 8
LAGP210_Pneumatic power pivot - 9

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 9
LAGP210_Pneumatic power pivot - 10

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 10
LAGP210_Pneumatic power pivot - 11

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 11
LAGP210_Pneumatic power pivot - 12

Pneumatic power pivot Passive Safety brake: it stops in absence of signal * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor witn M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 12
LAGP210_Pneumatic power pivot - 13

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 13

All UNIVER Group catalogs and technical brochures

  1. JLE

    5 Pages

  2. HZRS

    2 Pages

  3. HZ9N

    1 Pages

  4. HE/HF tubes

    1 Pages

  5. PRODUCT RANGE

    44 Pages

  6. NEWS 2017-2018

    32 Pages

  7. NEWS 2016

    16 Pages

  8. Product range

    44 Pages

  9. NEWS 2017

    32 Pages

  10. Valves

    210 Pages

  11. PRODUCT RANGE

    32 Pages

  12. RISERS

    4 Pages

  13. M series

    1 Pages

  14. POWER PIVOTS

    2 Pages

  15. PIN CLAMPS

    2 Pages

  16. CLAMPS

    2 Pages

  17. ACCESSORIES

    54 Pages

  18. AIR TREATMENT

    14 Pages

  19. HIGH TECH

    75 Pages

  20. CYLINDERS

    67 Pages

  21. fittings

    36 Pages