*mydirectindustry

Catalogs
UNIVER Group
LAGP155_Pneumatic power pivot

LAGP155_Pneumatic power pivot

Product catalog summary

Overview: The document provides technical specifications for the UNIVER GROUP LAGP155, a pneumatic power pivot used in automotive applications. It details the configurations, sensor options, pivot rotation angles, and brake systems.

Specifications:

Series: LAG - Power pivot with predetermined pivot rotation angles.
Model: P - Pneumatic-standard with a 155 = Ø100 mm cylinder.
Pivot Rotation Angles: Options include 120°, 90°, 60°, and 45°.

Sensor Options:

Electronic Sensor: Available with M12 swivel connector, with an additional option for brake condition detection.

Pivot Positions:

V: Vertical 180°
O: Horizontal 90°
Z: Vertical, mirror of V position with a max opening angle of 120°
P: Horizontal, mirror of O position with a max opening angle of 60°

Brake System:

B: With brake
W: Without brake

Valve Connections:

C: Integrated valve for cycle time optimization

Sensor Placement:

If not specified, the sensor is on the left side.
Options for right side, front side, and rear side placement are available.

Catalog excerpts

LAGP155 Pneumatic power pivot LAG = Power pivot with predeterminate pivot rotation angles 5 Sensor E = Electronic sensor with M12 swivel connector A = Electronic sensor with M12 swivel connector + electronic sensor for brake condition detection V = Vertical 180° O = Horizontal 90° Z = Vertical, mirror of V position Max opening angle 120° P = Horizontal, mirror of O position Max opening angle 60° 7 Brake system B = With brake W = Without brake UNIVER GROUP 8 Valve C = Integrated valve for cycle time optimization 9 Connections _ = If not speciﬁed, on the left side (sensor left side) D = Right side (sensor right side) F = Front side (in front of the sensor) P = Rear side (same side as sensor) Automotive NW_Rev.

Open the catalog to page 1

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60" - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 2

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 3

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 4

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 5

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 6

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60" - 90" -120" Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 7

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 8

Open the catalog to page 9

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60" - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 10

Open the catalog to page 11

Open the catalog to page 12

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 13

LAGP155_Pneumatic power pivot

LAGP155_Pneumatic power pivot

Catalog excerpts

All UNIVER Group catalogs and technical brochures