LAGP150 Pneumatic power pivot LAG = Power pivot with predeterminate pivot rotation angles 5 Sensor E = Electronic sensor with M12 swivel connector A = Electronic sensor with M12 swivel connector + electronic sensor for brake condition detection V = Vertical 180° O = Horizontal 90° Z = Vertical, mirror of V position Max opening angle 120° P = Horizontal, mirror of O position Max opening angle 60° 7 Brake system B = With brake W = Without brake UNIVER GROUP 8 Valve C = Integrated valve for cycle time optimization 9 Connections _ = If not specified, on the left side (sensor left side) D = Right side (sensor right side) F = Front side (in front of the sensor) P = Rear side (same side as sensor)

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90" -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Abattant pneumatique * : TOLERANCE TROUS DE CENTRAGE ± 0.02, TROUS FILETES ± 0.1 Pression min./max. de functionnement: 0,4 / 0,6 MPa Angle de rotatation etrier pre-etabli: 45° - 60" - 90" -120° Detecteur electronique avec connecteur M12, orientable a 0° ou 90° La society se reserve le droite d'apporter des modifications techniques sans preavis

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot Passive brake * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Pneumatic power pivot Passive brake * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45" - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeteiminate pivot rotation in degrees: 45° - 60" - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeteiminate pivot rotation in degrees: 45° - 60" Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeteiminate pivot rotation in degrees: 45° - 60" - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeteiminate pivot rotation in degrees: 45° - 60" - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.