*mydirectindustry

Catalogs
UNIVER Group
LAGP080_Pneumatic power pivot

LAGP080_Pneumatic power pivot

Product catalog summary

Overview: The document provides technical specifications for the LAGP080 series, a pneumatic power pivot system used in the automotive sector. It details the components, configurations, and functionalities of the system.

Specifications:

Series: LAG - Power pivot with predetermined pivot rotation angles.
Size: 080 - Ø 80 mm cylinder.
Version: NW_Rev. 00_1015.

Components and Features:

Pivot Rotation Angles: Options include 120°, 90°, 60°, and 45°.
Sensor Options: Electronic sensors with M12 swivel connectors, with an additional option for brake condition detection.
Position Configurations: Vertical 180°, Horizontal 90°, Vertical mirror of V position, Horizontal mirror of O position.
Brake System: Available with or without a brake.
Valve Connections: Integrated valve for cycle time optimization.

Installation and Orientation:

Sensor Placement: Default is on the left side, with options for right side, front side, or rear side placement.

Catalog excerpts

LAGP080 Pneumatic power pivot LAG = Power pivot with predeterminate pivot rotation angles 5 Sensor E = Electronic sensor with M12 swivel connector A = Electronic sensor with M12 swivel connector + electronic sensor for brake condition detection V = Vertical 180° O = Horizontal 90° Z = Vertical, mirror of V position Max opening angle 120° P = Horizontal, mirror of O position Max opening angle 60° 7 Brake system B = With brake W = Without brake UNIVER GROUP 8 Valve C = Integrated valve for cycle time optimization 9 Connections _ = If not specified, on the left side (sensor left side) D = Right side (sensor right side) F = Front side (in front of the sensor) P = Rear side (same side as sensor)

Open the catalog to page 1

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60" - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Subject to technical modifications without notice.

Open the catalog to page 2

Pneumatic power pivot Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Subject to technical modifications without notice.

Open the catalog to page 3

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120" Electronic sensor with M12 swivel connector that can be orientated at 0°or 90' Subject to technical modifications without notice.

Open the catalog to page 4

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 5

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 6

* : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± Min./Max. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 7

Pneumatic power pivot Passive brake * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 8

Open the catalog to page 9

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 10

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0. MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 11

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 12

Pneumatic power pivot * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 MinVMax. operating pressure: 0,4 / 0,6 MPa Predeterminate pivot rotation in degrees: 45° - 60° - 90° -120° Electronic sensor with M12 swivel connector that can be orientated at 0°or90° Subject to technical modifications without notice.

Open the catalog to page 13

LAGP080_Pneumatic power pivot

LAGP080_Pneumatic power pivot

Catalog excerpts

All UNIVER Group catalogs and technical brochures