CLEAN PROFILE KL ISO 15552 Cylinders Ø 32 ÷ 125

KL ISO 15552 Cylinders Ø 32 ÷ 125 CLEAN PROFILE Easier to clean QUICK INSTALLATION Sensors and connections on one side UNIVER TECHNOLOGY Strong and reliable ISO 15552 STANDARD Interchangeability Constructive characteristics 3 2 4 1. Die-cast end caps in aluminium alloy 2. Die-cast piston in aluminium alloy 3. Guide slide in acetalic resin with integrated magnetic ring 1 4. Wear-resistant cushion seals in nitrilic rubber compound 5. Lip piston seals in nitrile rubber compound 5 6 6. UNIVER Original self-aligning and self-lubricating guide bush for piston rod

Tube profile with integrated sensor grooves UNIVER Original since 2005 The absence of “sharp” edges ensures maximum safety during installation Recessed sensor DF series Magnetic piston standard supplied Fixing screws integrated in the end cap profile Sensor grooves available in different positions Accurate design of end caps in line with tube profile Possibility to mount DH sensors with brackets Versions available upon request Intermediate hinge with locking system guaranteed by UNIVER AUTOMOTIVE expertise Metallic rod scraper Low friction Standard fixing elements UNIVER Original +120°C High...

KL Ø 32 ÷ 125 - New design of the profile for easier cleaning - Grooves for recessed sensors and connections on one side for easy installation - Traditional UNIVER technology to ensure strength and reliability - Dimensions complying with international standards for a full interchangeability Further available versions TECHNICAL CHARACTERISTICS Ambient temperature Fluid Working pressure Bores Cushionings -20 ÷ 80 °C filtered air with or without lubrication 1,5 ÷10 bar Ø 32 - 40 - 50 - 63 - 80 - 100 - 125 pneumatic and adjustable on both sides Cylinder with L1-N locking unit CONSTRUCTIVE CHARACTERISTICS...

KL Cylinders ISO 15552 - Ø 32 ÷ 125 mm UNIVER GROUP Fixing elements and accessories 16 17 18 16 15 14 12 13 8 9 7 18 10 11 7 17 6 15 16 16 21 16 20 16 19 1 2 3 4 5 20 21 22 DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 KL NOTE PART NO. Female fork with clips Articulated self-lubricating fork Fork with axially mounted articulated pin Fork with angle-mounted articulated pin Floating joint Female hinge Pin 90° counter-hinge (CETOP) 90° counter-hinge 90° counter-hinge (CNOMO) Narrow female hinge with pin Articulated counter-hinge Articulated male rear hinge Male rear hinge...

Magnetic sensor DF series 2 wires NO 3 wires PNP NO 3 wires PNP NC For version with connector M8 and M12 add M08 or M12 at the end of the part no. Electric circuits BRN = brown BLK = black BLU = blue Assembly scheme Put the sensor in the proper groove and make sure that the fastening plate has the slot for screwdriver along the sensor axis. Turn the sensor inside its groove and make sure that the fastening plate is on the open part of the groove. Check the correct position of the sensor in the groove. Turn it to the wished position for detection. Keep the sensor in its position and screw the...

Univer in the world UNIVER S.p.A. Headquarter UNIVER Pty Ltd AUSTRALIA - 3175 Victoria Nicole Way Dandenong, 11 Tel. +61 3 97930377 Fax +61 3 97930399 [email protected] I - 20128 Milano Via Eraclito, 31 Tel. +39 02 25298.1 Fax +39 02 2575254 [email protected] Univer Service S.r.l. Branch Offices I - 20128 Milano Via Empedocle, 20 Tel. +39 02 25298.1 Fax +39 02 25298370 [email protected] www.universervice.it LOMBARDIA I - 20128 Milano Via Empedocle, 20 Tel. +39 02 25298.1 Fax +39 02 25298370 [email protected] I - 24060 Castelli Calepio Bergamo Via C. Curotti, 31/33...