*mydirectindustry

Catalogs
UNIVER Group
J64-RS_Slide units for compact cylinders

J64-RS_Slide units for compact cylinders

Product catalog summary

Overview: This document provides technical specifications and characteristics of UNIVER locking units for pneumatic cylinders. It includes details on cylinder bore sizes, rod diameters, pneumatic connections, and mass. The document also outlines the mechanical and technical features of the locking units, including their compatibility, performance under various conditions, and safety standards.

Specifications:

Cylinder Bore Sizes: Ranges from 16 mm to 125 mm.
Rod Diameters: Ranges from 6 mm to 32 mm.
Pneumatic Connection: G 1/8.
Mass: Varies from 0.43 kg to 10.70 kg depending on the size.

Technical Characteristics:

Fluid: Filtered air, with or without lubrication.
Working Pressure: 4.5 to 10 bar.
Ambient Temperature: -20°C to 80°C.
Locking Force: Maximum static locking force ranges from 200 N to 12300 N.
Dynamic Braking Force: 40% of the static locking force at 1 m/s.
Response Time: Varies from 12 ms to 40 ms at 6 bar.
Repeatability: Less than 1 mm at 1 m/s.
Resistance to Vibration: 10 g (10-55 Hz) for 30 minutes on each axis.
Shock Resistance: Ranges from 2 J to 40 J.

Performance and Safety:

The locking units are designed to handle load variations and sudden loads effectively.
They function well even if rods or shafts are dirty with oil or grease.
Safety standards are adhered to, with air pressure used only for releasing the device.

Applications:

Locking units can be used for various applications such as gates, slides, and other mechanical systems requiring precise locking.
They are compatible with both ISO microcylinders and larger ISO cylinders.

Additional Features:

Manual release is possible with specific screw configurations.
Locking units are designed for easy assembly and can be mounted on either side of the carriage.

J64-RS_Slide units for compact cylinders

J64-RS_Slide units for compact cylinders

All UNIVER Group catalogs and technical brochures