IBM40 UNIVERSAL Power clamps IB = UNIVERSAL power clamps M = Pneumatic with manual lever fully adjustable opening angle: 0° to 125° Max interchangeable with 50 and 63 sizes The opening angle range may vary according to the arm position and style UNIVER GROUP C = Central, 15 mm offset (standard) D = Right, 15 mm offset (standard) S = Left, 15 mm offset (standard) E = Central, 45 mm offset F = Right, 45 mm offset L = Left, 45 mm offset N = No arm 6 Sensor N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector

UNIVERSALPneumatic power clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modification without notice.

UNIVERSALPneumatic power clamp ** : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 *** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * * : AREA TO ACCES ANGLE ADJUSTMENT *****: DIMENSIONS TO BE RESPECTED IN CASE OTHER LMANUAL LEVERS ARE USED Subject to technical modification without notice. MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 125° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

UNIVERSALPneumatic power clamp with manual lever arm at 45 mm from pivot point (arm style E-L-F) * : "E" CENTRAL - 050 / 063 mm SIZES COMPATIBLE ** : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 *** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * * : AREA TO ACCES ANGLE ADJUSTMENT MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modification without notice.

UNIVERSALPneumatic power clamp * : "E" CENTRAL - 050 / 063 mm SIZES COMPATIBLE ** : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 *** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * * : AREA TO ACCES ANGLE ADJUSTMENT MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modification without notice.

UNIVERSALPneumatic power clamp with manual lever arm at 45 mm from pivot point (arm style E-L-F) * : "E" CENTRAL - 050 / 063 mm SIZES COMPATIBLE ** : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 *** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * * : AREA TO ACCES ANGLE ADJUSTMENT MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modification without notice.