10 Series
8Pages

PRESSURE SWITCH FEATURES • Tamper-Resistant Field Adjustment • Adjustable Ranges from 4 to 7500 PSI (0,3 to 517,1 Bar) • Choice of 7 Electrical Terminations • 1-1/4" Diameter • Height as Small as 3"

Available with seven electrical termination varieties, a choice of sensors, and several pressure connections, the 10 Series is designed to meet requirements for a variety of OEM and industrial applications. Just 1-1/4 inches in diameter and as small as 3 inches high, this compact, cylindrical switch mounts wherever space is at a premium. A reliable and cost-effective switch, the 10 Series is ideal for applications with high settings and surges. Among the tough applications in which the product has proven itself are: fire suppression systems, mobile hydraulic units, compactors, balers and...

specifications AMBIENT TEMPERATURE LIMITS 0 to 160°F (-18 to 71°C) with Buna-N construction; 0 to 180°F (-18 to 82°C) with Viton® construction; set point shifts less than 1% of range for a 50°F (28°C) ambient temperature change. Unit will operate down to -40°F (-40°C) but with reduced repeatability 200°F (93°C) with Buna-N sensor; 250°F (121°C) with Viton® sensor Set point repeats after 50 G, 10 millisecond duration Set point repeats after 10 G, 5-500 CPS ENCLOSURE CLASSIFICATION Termination Types C, D, E, and G: Enclosure Type 4. Termination Type F: IP65. Types A & B: Not applicable Models...

approvals UNITED STATES AND CANADA UL Recognized, cUL Recognized Pressure: UL 508; CSA C22.2 No. 14, file # E42272 Pressure Equipment Directive (PED) (2014/68/EU) Compliant to PED Products rated lower than 7.5 psi are outside the scope of the PED UL 508, UL 61010 Canadian Registration Number (CRN): Refer to www.ueonline. com/certs list of approved models RUSSIA EAC Customs Union Certificate (OPTIONAL – code M406) 0Ex ia IIC T6 Ga X Tamb = -50°C to +60°C NANIO CCVE Certified Certificate TC RU-C-US. ГБ05.B.01185 ГОСТ Р МЭК 60079-0-2011; ГОСТ Р МЭК 60079-112010; ГОСТ 31610.26-2012/IEC...

how to order Build a part number by selecting appropriate code for each feature category. Example: 10-B11*M201 - Set At_on Rise/Fall 10 Series Designation B Electrical Termination Type ORDERING CODE SERIES DESIGNATION 10 ELECTRICAL TERMINATION TYPE A B C D E F G DESCRIPTION Designation for 10 Series product line 0.11" push-on terminals. Mating terminals supplied 0.25" push-on terminals Enclosure Type 4; 1/2" NPT (male) conduit connection; 20" leads Enclosure Type 4; 20" leads Enclosure Type 4; 1/2" NPT (female) conduit connection; 5' cable IP65 4 terminal DIN connector. Mating part not...

dimensional drawings Dimensional drawings for all models may be found at www.ueonline.com Type 10-A 18 AWG FACTORY SEALED LEADWIRES 20 ± 1” lg.

"A" Dimension Chart Models NOTE: For full size drawings, please visit our web site @www.ueonline.com PRESSURE CONNECTION DETAILS Model 10-12

RECOMMENDED PRACTICES AND WARNINGS United Electric Controls Company recommends careful consideration of the following factors when specifying and installing UE pressure and temperature units. Before installing a unit, the Installation and Maintenance instructions provided with unit must be read and understood. • To avoid damaging unit, proof pressure and maximum temperature limits stated in literature and on nameplates must never be exceeded, even by surges in the system. Operation of the unit up to maximum pressure or temperature is acceptable on a limited basis (e.g., start-up, testing)...