Accurate & Repeatable Fluid Mixing Environmentally Friendly Lubrication Fluid Mixing Technology The Uni-Blend™ mixing system is designed to accurately mix water with concentrated fluids in any ratio from 1:1 to 50:1 and deliver the mixture under pressure to a customer-supplied piping network. The Uni-Blend™ automatically mixes batches and maintains a reserve supply of up to 50 gallons [190 liters] per ratio. Up to three batches of differing ratios can be maintained in separate tanks. • Accurate flow control • Maintain the perfect pressure & mix • Easy setup & intuitive interface The Uni-Blend™ is the only fully programmable industrial fluid mixing system available on the market and is built for years of service in tough, industrial environments. Maintain one, two, or three separate mix ratios maintain any ratio between 1:1 and 50:1 • Water supply requirements: 30-60 psi [2-4 bar], 4 gallons/min [15 liters/min] minimum available flow • Power requirements: 230 VAC, 60Hz, 3 phase with neutral tap, 30 amp • Holding tank capacity: 50 gallons [190 liters] per tank • Mix ratio range: 1:1 to 50:1 • Number of mix ratios: 1 to 3 • Mixed fluid supply: 2 gallons/min [8 liters/min] per ratio • Mixed fluid pressure: 5-80 psi [0.34-6 bar] • Tote stand size: 48” [1219 mm] x 40” [1016 mm] tote, 330 gallons [1250 liters] or 275 gallons [1040 liters] Accurate Flow Control 330 gallon [1250 liter] tote The Uni-Blend™ utilizes precise flow meters to ensure accurate mixing. Mixing is controlled by the PLC which opens a water valve and monitors the water flow rate. Simultaneously, the PLC controls the rotational speed of a gear pump which delivers concentrate at the proper rate for the programmed mix ratio. The flow rates are constantly monitored to maintain the proper rate regardless of viscosity, temperature, or downstream pressure. This level of precision allows the Uni-Blend™ system to deliver the perfect batch each and every time. Optional platform holds a 275 gallon [1040 liter] or 330 gallon [1250 liter] tote of concentrate Large tank opening makes for easy cleaning & maintenance Durable, heavy-gauge steel construction Reliable & accurate positive-displacement concentrate pump

Maintain The Perfect Pressure & Mix The Uni-Blend™ is designed to constantly circulate your fluid to maintain a homogeneous mixture. The mixed fluid in the tank is stored at atmospheric pressure and delivered to your piping network under pump pressure. To ensure continuous circulation, the piping network should be configured as a loop starting and returning to the Uni-Blend™. To set and maintain proper fluid pressure, a relief valve is installed in the return line of the loop. Easy Setup & Intuitive Interface View alarm details View tank levels At the heart of its advanced control system is an...