Saw Blade Lube Systems
12Pages

kUNlST Environmentally Friendly Lubrication Saw Blade Lube Systems Cutt/ng Edge Technology

Saw Blade Lube Systems Cutting Edge Technology Cutting Edge Technology Unist saw blade lubrication systems deliver all the benefits of Minimum Quantity Lubrication (MQL) to your band or circular saw in a durable, easy-to-install package. Longer lasting blades, better cut quality, fluid savings, and clean, dry chips are just a few of the reasons people love our systems and Coolube® lubricant. If you’re currently using flood coolant on your saw, switching to a Unist saw blade lubrication system will completely eliminate the need for coolant, alleviating the health and safety concerns it...

Call Unist Today! 800.253.5462 Images courtesy of Unist customer sawing 3” [76.2 mm] Inconel bar stock. Both cuts were made running at the same speed and feed. Improved Results Sawing With Unist The photo on the left shows cut quality before the Unist system was added. This cut was made using flood coolant and shows excessive chatter and a large burr on the edge of the stock. The photo on the right shows the same material cut with an identical blade after a Unist system was installed. The cut was made using our Coolube® lubricant. Not only was the cut quality greatly improved, but blade...

Saw Blade Lube Systems Cutting Edge Technology Saw Blade Lube Systems & Coolube® Maximize the benefits of sawing with MQL by filling your system reservoir with Unist Coolube®. Coolube® is a 100% natural biodegradable lubricant derived from renewable vegetable products that are friendly to the environment and operators. When applied properly, Coolube® is completely consumed in the sawing process and the mess of traditional flood coolant is eliminated. As an added benefit, when a saw blade lube system is used exclusively with Coolube®, Unist guarantees the pumps forever! Coolube® 2210 &...

Your Unist saw blade lubrication system’s pump is guaranteed for life when used exclusively with Unist Coolube® Lubricant Band Saw Blade Nozzle The Band Saw Blade (BSB) Nozzle provides users with alternative mounting options and delivers an ideal spray pattern for horizontal band saw blade lubrication. Its smaller footprint makes for easier mounting and less intrusive installation. When mounted to the blade guide, proper positioning is easy when using the built-in ruler guide. Simply align the top of the blade with the appropriate blade size marking and secure the nozzle in place. The...

Saw Blade Lube Systems Cutting Edge Technology Configuration Options Number Of Outputs Operate up to 3 pumps for 3 individual outputs. Outputs can be configured to operate independently or simultaneously. Various sized enclosures are available depending on the number of pumps. Control saw blade lubrication system operation with the following valve options: • Solenoid valve For actuation using an electrical signal from the machine • Manual valve 3-way slide valve for simple manual on/off control • Air pilot valve For use with a low flow air signal • Foot valve For hands-free manual operation...

Email salessupport@unist.com Reservoirs A wide variety of fluid reservoirs are available. 64 oz [1893 mL] Polyethylene with low level switch Air trap for use with a pressurized fluid supply (Also available without a low level switch) Mounting System enclosures can come with or without magnetic mounts. Magnetic mount Enclosure Lock Upgrade from the standard thumb latch to a keyed lock and prevent tampering. Nozzle Tubing Coiled or straight nylon single line tubing is available for connecting nozzles to a saw blade lubrication system. Standard length is 10 feet [3 m] coil tubing with 10 feet...

Saw Blade Lube Systems Cutting Edge Technology ø 1.00 in. [25.4 mm] Nozzle Dimensions Bat Nozzle The Bat Nozzle comes in 3 different lengths to accommodate a broad range of saws. Part number Band Saw Blade Nozzle Band Saw Guide Nozzle The BSB Nozzle comes in 3 different lengths to accommodate various blade sizes. Part number * Part number * * Nozzle shown without mounting kit, but is included with all “-A” part numbers * Nozzle shown without mounting kit, but is included with all “-A” part numbers 0.50 in. [12.7 mm] Clamp plates for mounting Clamp plates for mounting Mounting clamp plates...

Email salessupport@unist.com Band Saw Nozzle Mounting Kit (The Band Saw Nozzle Mounting Kit includes the block mount, rail mount, clamp plates, and required socket head cap screws) Block Mount The block mount adds 0.50” [12.7 mm] to thickness and allows the nozzle to be placed at right angle to the mounting surface. BSB with block mount BSB and BSG with block mount Rail Mount The rail mount adds 0.25” [6.4 mm] to thickness and allows 1.88” [47.8 mm] of additional vertical adjustment. 0.25 in. [6.4 mm] BSB with rail mount BSB and BSG with rail mount Contact Us Today! 800.253.5462 (US & CAN)...

Unist, Inc. 4134 36th Street SE Grand Rapids, MI 49512 USA U.S. & Canada: 800.253.5462 International: 616.949.0853 Email: salessupport@unist.com Copyright © 2018 Unist, Inc. All rights reserved.