Mini-Roller™
2Pages

Intelligent Stock Coating Solution Environmentally Friendly Lubrication Thin & Narrow Coil Stock Lubrication The Mini-Roller™ lubricator is ideal for thin or narrow stock applications where a Uni-Roller® S2 is too large for the press window. When combined with an SPR-2000™ or SPR-2000 JR™ the Mini-Roller™ will apply the correct amount of fluid for your application and do it consistently day after day. • Reduce lubricant consumption by 50% or more • Quick-change rollers for easy maintenance • Cleaner floors & work area The Mini-Roller™ is available in both horizontal and vertical configurations. Each uses internally-supplied rollers that are essential to precisely applying the fluid. The lubricant is transferred to the stock through durable polyester felt or polyurethane foam roller covers. These cover materials apply the lubricant smoothly and evenly across both sides of the stock. The horizontal configuration has a dispenser tube with small holes placed along its length inside each of the rollers. Fluid is injected into the dispenser tubes from the fluid controller and dispensed across the inside of the rollers. The Mini-Roller™ applies the exact amount of lubricant required. This eliminates the mess and waste associated with in-die spray systems and externally-fed roller systems. The result is not only a cleaner shop, but also significant savings from decreased fluid waste, improved die life, better part quality and increased machine up-time. Many customers have reported savings resulting in a return on investment of less than six months! The vertical configuration includes a baffle positioned inside each of the rollers near the top. Every time fluid is injected into the dispenser tube from the fluid controller, it spreads across the baffle where it is then redirected to the outside of the roller. The wicking action of the roller cover material then draws the fluid along the length of the roller. Perforated stainless steel roller cores Internal fluid dispenser tubes Fluid from SPR-2000™ programmable fluid controller Uniform coating on both sides Porous foam or felt roller covers Fluid from SPR-2000™ programmable fluid controller The Mini-Roller™ is available in four sizes ranging from 1” [25 mm] wide to 4” [102 mm] wide with a stock thickness up to 0.06” [1.5 mm]. Internal baffle directs fluid through porous roller cover Uniform top & bottom coating Wicking action pulls fluid down the length of the roller Spring assisted roller pressure Rugged aluminum & steel frame Vertical application Internally-fed rollers Lubricates one or both sides of stock up to 0.0

Standard Sizes Horizontal Mini-Rollers™ coverage up to 4” [102 mm] A (mounting holes centers) Roller coverage Vertical Mini-Rollers™ coverage up to 4” [102 mm] Roller coverage ROLLER COVERAGE Features & Options Standard features Options Polyurethane foam cover Polyester felt cover Reduces uneven wear on cover when a variety of stock widths and thicknesses are used. Due to limited fluid compatibility, consult Unist. Extremely durable and compatible with a broad range of fluids. Rotation sensor Used to provide an input to an SPR-2000™ or SPR-2000 JR™ controller based on roller rotation....