Airless Spray Nozzles
2Pages

#UN4ST Environmentally Friendly Lubrication Airless Spray NozzlesNon-Contact / Supplemental Applications Additional Fluid In Tough Applications The Unist Uni-Roller® S2 excels at applying a continuous even coating of fluid to coil stock or a blank. However, there are times when additional fluid is needed at specific areas in the die. Unist Airless Spray Nozzles provide this extra boost. When connected to the SPR-2000™ programmable fluid controller, they integrate seamlessly into the jobs lubrication profile. • Versatile nozzle for in-die lubrication • User-friendly design • Requires no air to operate Because these nozzles rely on the velocity of the fluid to create the spray pattern, their proper operation requires a fluid which is close to the viscosity of water. As a result, they work extremely well with water based solutions and emulsions, but are generally not recommended for use with oils or viscous synthetic fluids. All Unist Airless Spray Nozzles have a fan spray pattern. The spray diameter and flow rate of the fluid are controlled by specifying the spray angle and the nozzle orifice size. The available spray angles and corresponding coverage are shown below. System Example The Airless Spray Nozzles connect directly to the outputs on the SPR-2000™. Up to 22 nozzles can be independently controlled or used in combination with a Uni-Roller® S2 applicat

Nozzle Styles Adjustable height & angle 10” [254 mm] Rigid stainless tube Rigid Stainless Steel Nozzle Magnetic base This 10” [254 mm] Rigid Stainless Steel Nozzle includes a vertical mount that allows height and application angles to be adjusted. The Rigid Stainless Steel Nozzle offers superior rigidity, making it the preferred choice when the nozzle position doesn’t require frequent changes. Quick-disconnect coupling for simple connection to SPR-2000™ valves 14’ [4.26 m] 5/32” [4 mm] Tubing 12” [305 mm] Flexible plastic Loc-Line® Loc-Line® Nozzle This 12” [305 mm] flexible plastic...