} 5EN5ITPTS 320 TEMPERATURE SENSOR WITH A PROBE AND A PLASTIC HEAD TEMPERATURE SENSORS WITH A HEAD DESCRIPTION AND APPLICATION This temperature sensor is designed for contact measurement of temperature of gaseous or liquid substances. The plastic head covering the sensor's terminal box features a grommet or a connector. When combined with a centre holder, the sensor is suitable for measuring temperature in air conditioning ducts. The modified variant with a welded fitting can be then used for measuring internal pipeline temperature. The standard temperature range of the sensor is -50 to 150°C. By extending the probe length, it is possible to increase the maximum temperature up to 250°C. The sensor can be used in any system compatible with the sensor types or the output signals listed in the specifications table. For easy installation, the sensor features a unique "S-head" design made by the SENSIT s.r.o. The sensor is designed for chemically non-aggressive environment. The manufacturer issues the EU Declaration of conformity. Calibration - All the products are subject to a final metrologic inspection performed by a comparison with etalons or working instruments. Continuity of etalons and working instruments is amended by Section 5 of Act no. 505/1990 on metrology. The manufacturer offers an option to deliver sensors calibrated in the SENSIT s.r.o. company laboratory (according to the requirements of the EN ISO/IEC 17025 standard as amended), or in an accredited laboratory.

WIRING SCHEME SENSOR WITH A GROMMET: With resistance output TEMPERATURE SENSORS WITH A HEAD DIMENSIONAL DRAFT With a grommet Centre holder stainless steel, K 120 SENSIT s.r.o., Skolni 2610,756 61 Roznov pod Radhostem, Czech Republic T +420 571 625 571 F +420 571 625 572 E [email protected]