*mydirectindustry

D7086882

Product catalog summary

Manufacturing and Contact Information:
Manufactured by Uniphos Envirotronic Pvt. Ltd, located in Gujarat, India, with a marketing office in Mumbai. Contact details include phone numbers and email for inquiries.

Document Revision:
Rev.01/Jan. 24

Product Overview:
The document provides information on the Detector Tube for Hydrogen Sulphide-2M, part number D7086882, used for detecting hydrogen sulphide in air or technical gases.

Application:
The detector tube is designed for the detection of hydrogen sulphide in various environments.

Detector Tube Sampling Pump:
Compatible with KWIK DRAW Pump, Gas-Tester IIH, Gas-Tester I / Thumb Pump-Sampler, Toximeter II / III, and other suitable pumps. Users should follow the respective instructions for use.

Measuring Range:
The tube measures hydrogen sulphide concentrations from 20 ppm to 200 ppm with one stroke (n=1) and from 2 ppm to 20 ppm with ten strokes (n=10).

Chemical Reaction and Color Change:
The detection involves a chemical reaction where hydrogen sulphide reacts with a mercury compound to form mercury sulfide, resulting in a color change from white to brown.

Ambient Conditions During Sampling:
The detector tubes can be used without compensation for readings between 0 °C and 60 °C (32 °F and 140 °F) and up to 80% relative humidity.

Interferences and Cross Sensitivities:
No interference from sulfur dioxide up to 200 ppm, hydrochloric acid up to 100 ppm, and ethyl mercaptan up to 100 ppm.

Catalog excerpts

Information Data Sheet KWIRdraw Detector Tube Hydrogen Sulphide-2M uniphos Detection of hydrogen sulphide in air or in technical gases. KWIK DRAW Pump, Gas-Tester IIH, Gas-Tester I / Thumb Pump-Sampler, Toximeter II / III, or other suitable detector tubes pumps. Observe respective instructions for use. 20 ppm to 200 ppm hydrogen sulphide at n=1 (1 stroke). 2 ppm to 20 ppm hydrogen sulphide at n=10 (10 strokes). Reaction of hydrogen sulfide with mercury compound forming mercury sulfide. Color change: White ^ Brown 5. Ambient Conditions During Sampling Detector tubes can be used without compensation of the reading between 0 °C and 60 °C (32 °F and 140 °F)] and up to 80% rh [67 g/m3 at 50 oC (120 oF)]. Marketing Office: Dr. Annie Besant Road, Worli, Dist: Valsad, Gujarat, India Tel. : +91 9909994042

Open the catalog to page 1

D7086882

D7086882

Catalog excerpts

All Uniphos Envirotronic Pvt. Ltd. catalogs and technical brochures