CTL Linear units
32Pages

CTL LINEAR UNIT WITH A LINEAR MOTOR

UNIMOTION is a leading company in the industrial automation field, at a global level. Combining innovative engineering solutions – Unimotion helps companies of all sizes across a wide range of industrial segments. Unimotion develops Industry 4.0-enabled products and systems with leading quality, performance and value. Engineering, Production, Construction, Warehouse, Research & Development department; all this can be found under one roof. Thanks to years of experience and a consistent focus on automation technology, we are continually improving our products and implementing innovations that...

In order to improve the products in this catalogue the specifications are subject to change without notice.

CTL LINEAR UNIT – CTL / CHARACTERISTICS CHARACTERISTICS CTL is a linear unit with an integrated high-performance UNIMOTION linear motor. High accuracy is achieved using a precision low noise linear guiding system while the linear motor enables extremely high dynamic movements. Using innovative UNIMOTION linear motor drive enables the unit to achieve speeds up to 5 m/s and offer the highest acceleration among all of our linear units. Due to the linear motor drive, the CTL linear units are backlash-free. The CTL linear units offer a range of different built-in incremental and absolute...

CTL LINEAR UNIT – CTL / STRUCTURAL DESIGN 6   1 – Carriage   2 – Motor and encoder connectors (IIoT connector optional)   3 – Aluminium base profile   4 – Slot for mounting   5 – Slot for the magnetic field sensors   6 – End block with the protection strip tensioning system   7 – Corrosion-resistant protection strip   8 – Standard energy chain   9 – Energy chain holder 10 – Energy chain support profile With a preassebled standard energy chain In order to improve the products in this catalogue the specifications

CTL LINEAR UNIT – CTL / HOW TO ORDER B C onnector orientiation also determines the energy chain mounting direction. For more information please refer to the dimensional drawing in the section section “Dimensions”. For technical information please refer to the section “Accessories → Energy chain”. Absolute stroke [mm]: (Absolute stroke = Effective stroke + 2 × Safety stroke) Carriage version: Energy chain: – 0: Without – A: 28 × 70 – B: 28 × 100 Protection cover: – 0: Without – 1: Corrosion-resistant protection strip A vailable for absolute stroke of up to 4800 mm. For technical information...

CTL LINEAR UNIT – CTL / TECHNICAL DATA TECHNICAL DATA General technical data Max. permissible loads Forces Fpy [N] D ynamic load capacity and dynamic moments of the linear guiding system. These values are the basis for calculating the service life. There should be noted that some pretension of the linear guides due to the attraction force of the linear motor is always present in the guiding system. For more information regarding this pretension, please refer to the section "Service life". 2 Depends on the measuring system. 3 For shorter strokes, please contact us. 4 For longer strokes,...

CTL LINEAR UNIT – CTL / TECHNICAL DATA Drive data Speed class High speed Frictional force of the carriage without load Maximum axial load4, 5 Fmax [N] Carriage version High speed High speed High speed I n combination with the standard magnetic plate. For more information regarding the linear motors, please refer to the Unimotion documentation related to the linear motors. M aximum acceleration of the linear unit with the protection cover is limited to 50 m/s2. The lower value (the one specified in the table or the limit value stated here) must be considered. 3 Maximum travel speed depends...

CTL LINEAR UNIT – CTL / TECHNICAL DATA Additional mass of the linear unit when the standard energy chain is selected. hec × wec [mm] Mass of the energy chain set2 I nternal height and width of the standard energy chain. The mass mec refers to the mass that is added to the mass of the linear unit mCTL if the standard energy chain option is selected. M ax. moved mass mm, ec includes the complete mass of the energy chain and its holder. This mass should be added to the moved mass of the linear unit mm, CTL if the standard energy chain is selected. Absolute stroke F or more information...

CTL LINEAR UNIT – CTL / TECHNICAL DATA In order to improve the products in this catalogue the specifications are subject to change without notice.

CTL LINEAR UNIT – CTL / TECHNICAL DATA Maximum axial load as a function of travel speed of the carriage I n the folowing diagrams, the maximum axial loads aplied to the carriage as a function of travel speed for different voltages are presented. In order to improve the products in this catalogue the specifications are subject to change without notice.

CTL LINEAR UNIT – CTL / TECHNICAL DATA In order to improve the products in this catalogue the specifications are subject to change without notice.

CTL LINEAR UNIT – CTL / DIMENSIONS DIMENSIONS A ll dimensions are in mm. Drawing scales may not be equal. In order to improve the products in this catalogue the specifications are subject to change without notice.

CTL LINEAR UNIT – CTL / DIMENSIONS Carriage version I f the IIoT is selected refer to the vaule in the brackets T he feature is not present on the unit CALCULATE AND CONFIGURE YOUR OWN SOLUTION The LINEAR UNITS CALCULATION TOOL is an online application that enables quick and easy selection of a suitable product, with the possibility of achieving the optimal ratio between the given capacity and the price, including 3D CAD models. For more information please contact us or visit our website. In order to improve the products in this catalogue the specifications are subject to change without noti

CTL LINEAR UNIT – CTL / DIMENSIONS F or more information about slot nuts please refer to the section “Accessories → Connection elements → Slot nuts”. In order to improve the products in this catalogue the specifications are subject to change withou