LX-EP2 SERIES
2Pages

TWO CHANNEL DIGITAL OUTPUT The UniMeasure LX-EP2 Series linear position transducer with digital output is a low cost, compact device for use in light to moderate duty applications in dry environments. The plastic bodied device is ideal for high volume OEM situations where cost is a major consideration and in applications where small size or low weight are of paramount importance. The sensing element in the LX-EP2 is an optical incremental encoder with electrical outputs consisting of two square wave, TTL level output channels in quadrature. Each output channel is open collector, The electrical connection to the LX-EP2 is a Molex connector with four pins at 1.25mm centers. An accessory electrical cable offered in various lengths is available. FOOTNOTES TO SPECIFICATIONS 1. Supplemental Data section located at end of LX Series pages. 2. Resolution shown is for times one counting mode. Resolution may be increased by a factor of four with interface electronics capable of quadrature times 4 counting mode. 3. Resolution shown is a calculation based upon the capstan diameter, wire rope diameter and line count of the encoding device. Tolerance on resolution accounts for resolutional differences from unit to unit due to manufacturing tolerances on the capstan and wire rope. In practice, the output count in a given unit of travel is an integer. STANDARD OUTPUT CONNECTION DIAGRAM RANGE (inch) NOMINAL WIRE ROPE TENSION (oz) (N) MODEL NUMBER CONFIGURATION BASIC CONFIGURATION WIRE ROPE ELECTRICAL CONNECTION LOCATION 10517 Electrical Cable assembly includes Compatibilty Adapter. 4175 SW Research Way, Corvallis, Oregon 97333 U.S.A. | Tel: 541-757-3158 | Fax: 541-757-0858 | Email: sale

Dimensions in brackets are millimeters ACCESSORIES 10346 – RIGHT ANGLE MOUNTING BRACKET The Right Angle Mounting Bracket serves as a base for mounting the LX transducer perpendicular to a surface. The transducer may be mounted in any of four different wire rope exit orientations when mounted on the outside of the bracket (see figure) or any of three orientations when placed above the bracket mounting holes. ng ORDER MODEL NUMBER: 10346 10156 – TWO AXIS SWIVEL BASE With a capability of 360° rotation about the vertical axis and 245° rotation about the horizontal axis, the 10156 Two Axis...