LX-EM SERIES
2Pages

LX-EM SERIES HALL EFFECT DIGITAL OUTPUT The UniMeasure LX-EM Series linear position transducer with digital output is a low cost, compact device for use in light to moderate duty applications in dry environments. The plastic bodied device is ideal for high volume OEM situations where cost is a major consideration and in applications where small size and weight are of paramount importance. The sensing element in the LX-EM is a non-contact robust magnetic hall effect device. The standard output is a push-pull line driver from a 7272 IC where the magnitude of the output voltage pulse approximates the input voltage. The output is capable of sourcing and sinking up to 20 mA per channel. When operated with a 5 VDC excitation voltage the output is RS-422A compliant. The LX-EM is available with two channel (A & B) or four channel (A, B, A0, & B0) configuration. Various lengths of electrical cable are also offered. RANGE (inch) RESOLUTION TOLERANCE NOMINAL WIRE ROPE TENSION (oz) (N) 1. Resolution shown is for times one counting mode. Resolution may be increased by a factor of four with interface electronics capable of quadrature times 4 counting mode. MODEL NUMBER CONFIGURATION Basic Configuration WIRE ROPE ELECTRICAL CONNECTION LOCATION 4175 SW Research Way, Corvallis, Oregon 9733

LX-EM SERIES SUPPLEMENTAL DATA DIMENSIONAL INFORMATION ELECTRICAL INFORMATION OUTPUT LX-EM Series RANGE 16” 50” 4.9 to 28 VDC Push-Pull Differential Line Drive Push-Pull, current sourcing and current sinking output. Input Voltage: 4.9 to 28 VDC. 2 CHANNEL OUTPUT OUTPUT STAGE MOUNTING SURFACE Ø.156 (Ø4.0) THRU (2 PL) (MOUNTING HOLES) Dimensions in brackets are millimeters ACCESSORIES 10346 – RIGHT ANGLE MOUNTING BRACKET The Right Angle Mounting Bracket serves as a base for mounting the LX transducer perpendicular to a surface. The transducer may be mounted in any of four different wire rope...