FX-HM SERIES
2Pages

FX-HM SERIES - Analog Position Transducer 0 to 10 VDC ANALOG OUTPUT The FX-HM series linear position transducer provides up to 15” (381mm) of measurement range in a subcompact plastic package. With a two point mounting system and a diameter of 1.5 inches, it is ideal for use in areas where space is a premium. The device employs a non-contacting hall effect internal sensor which permits use in applications where a very high cycle life is required. With an excitation voltage requirement anywhere in the range of 4.9 to 30 volts and a very low current requirement, the unit may be battery powered or operated from most standard instrumentation power supplies. The analog voltage output of nominally 0 to 10 VDC may be easily interfaced to most popular data acquisition, PLC and display devices. The FX-HM with a dynamic response capability up to 25 Hz over a 1.5” range is acceptable for use in measuring suspension travel, throttle position, machine mechanism monitoring and many other applications where space restrictions exist. MODEL NUMBER CONFIGURATION Basic Configuration WIRE ROPE INGRESS PROTECTION LEADER WIRE WITH FITTINGS LEADER WIRE ROPE 24" [600] CRIMP SLEEVE CONNECTOR OPTION “C” FIG C CABLE TO CABLE CONNECTOR WITH MATING CONNECTOR TRANSDUCER ELECTRICAL CABLE FROM TRANSDUCER CABLE TO CABLE CONNECTOR MATING CONNECTOR CONNECTOR OPTION “K” FIG D CABLE TO CABLE CONNECTOR WITH NO MATING CONNECTOR TRANSDUCER ELECTRICAL CABLE FROM TRANSDUCER CLIP (1 EA) Dimensions in brackets are millimeters

FX-HM SERIES S U P P L E M E N TA L DATA DIMENSIONAL INFORMATION FX-HM Series .250 [6.4] (dimensions in brackets are millimeters) ACCESSORIES 10443 – RIGHT ANGLE MOUNTING BRACKET The Right Angle Mounting Bracket serves as a base for mounting the FX-HM transducer perpendicular to a surface. The transducer may be mounted in any of eight different wire rope exit orientations when mounted on the outside of the bracket (see figure) or any of five orientations when placed above the bracket mounting holes. Order model number: 10443 TWO AXIS SWIVEL BASE RIGHT ANGLE BRACKET WITH TRANSDUCER MOUNTED...