Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. UNILIFT
  3. Cable trolleys for C1, C1A rail systems

Cable trolleys for C1, C1A rail systems

Cable trolleys for C1, C1A rail systems
1 / 20 PagesView full catalog

Cable trolleys for C1, C1A rail systems

Product catalog summary
Technical Specifications and Guidelines for Cable Supply Systems
Overview: This document provides comprehensive technical specifications and guidelines for designing and implementing cable supply systems, focusing on mobile receivers and festoon supply systems. It covers materials, components, and design considerations for various environmental conditions.
Specifications: Key parameters include the length of the towing trolley route, cable trolley length, number of cable trolleys and loops, cable loop height, and storage area dimensions. It also specifies the distance between brackets and the cable length addition coefficient.
Materials and Components: Materials such as galvanized steel, stainless steel, polyamide, and polypropylene are listed, along with catalog numbers, types, dimensions, and weights for components like track support brackets, end stops, and cable trolleys.
Design Considerations: Emphasizes designing power supply systems to prevent accidents and adapt to challenging conditions like aggressive environments, heat, UV radiation, high humidity, dust, and potentially explosive areas. Custom solutions from UNILIFT are available.
Accessories and Additional Components: Details on accessories for C1 and C1A rails, including support arms, girder clips, towing arms, and end clamps, specifying materials, dimensions, and weights.
Environmental and Operational Conditions: Specifies operational temperature range (-30°C to +80°C) and maximum trolley speed (80 m/min) for both plastic and steel cable trolleys, highlighting maximum load capacities.
Recommendations: Advises consulting with UNILIFT for specific requirements and custom solutions, noting that certain components and configurations are available on request.
Technical Catalog for Cable Glands and Accessories
Overview: This catalog details various cable glands and accessories, including specifications, materials, and dimensions for flat and round cables, cable mounting clips, and other accessories.
Specifications: Lists multiple types of glands, such as DPPK and DPPS, with specifications including thread type, cable dimensions, and weight. Accessories include rope thimbles, rope clips, and spring hooks made from materials like galvanized steel and stainless steel A2.
Materials and Construction: Glands are constructed with aluminum bodies and oil-resistant rubber gaskets, with stainless steel bolts. Accessories are made from materials such as polyamide and polypropylene for cable mounting clips.
Operating Conditions: The working temperature range for the glands is -30°C to +100°C, with an internal protection level rated at IP 68, indicating high resistance to dust and water.
Customization: Customization of hole dimensions and their locations in rubber inserts is possible upon request.
Contact Information: Provides contact details for the company, including phone numbers and email addresses.
See more

Catalog excerpts

Cable trolleys for C1, C1A rail systems-1

Cable trolleys and accessories

 Open the catalog to page 1
Cable trolleys for C1, C1A rail systems-2

Mobile receivers cable supply system Prowadnice ceowe C1 i C1A oraz akcesoria Main design rules for mobile receivers supply systems Girder clip Festoon supply system was designed for standard work conditions, both indoors and outdoors. Track support bracket The supply system can also be used in difficult conditions, such as: Track coupler Swinging towing arm Rails C1 Cable trolley End clamp Towing trolley Flat cable - aggressive environment, - heat, - UV radiation, - high humidity, - dusty, - potentially explosive area. The UNILIFT company provides help with supply system design, so please submit...

 Open the catalog to page 2
Cable trolleys for C1, C1A rail systems-3

C1, C1A rails and accessories Rails C1, C1A and accessories Material: - Cold formed, Sendzimir galvanized steel PN-EN 10327 - stainless steel A2 Jx - axial moment of inertia Wx - axial modulus * - please consult - stainless steel Curve sections: on request (Rmin = 750 mm) Track support bracket UC12, UC12-1, UC12a - galvanized steel - stainless steel A2 - stainless steel UC12, UC12-1 - with bolts and threaded plate UC12a - without bolts and threaded plate Track support bracket UC15 - galvanized steel - stainless steel A2 * - please consult - stainless steel Attention: UC15 can be used only for...

 Open the catalog to page 3
Cable trolleys for C1, C1A rail systems-4

Accessories for C1, C1A rails Track support bracket UC13 Material: - galvanized steel - stainless steel A2 - stainless steel Track coupler LC11, LC12 Material: - galvanized steel - stainless steel A2 Attention: Use LC12 only for C1A rail * - please consult Dimensions [mm] - stainless steel body - galvanized or stainless steel A2 bolts, washers - galvanized or stainless steel A2 bumper - rubber - stainless steel Bolt with square nut M8x25/N Square nut M8-4KT - galvanized steel - stainless steel A2 - stainless steel

 Open the catalog to page 4
Cable trolleys for C1, C1A rail systems-5

Accessories for C1, C1A rails Support arm KL-C1/..., KL-C1A/... - cold formed Sendzimir galvanized steel PN-EN 10327 - stainless steel A2 Other support arm lengths are available. In that case, please note the correct type: KL-C1/length [mm], catalog no. 1006.00 - length [mm] KL-C1A/length [mm], catalog no. 1006.01 - length [mm] Example: KL-C1/1200, cat. no.. 1006.00-1200 * - please consult - stainless steel Examples of mounting suport arms with girder clips G - support mounted on higher shelf Support arm made of C1 or C1A rail Coefficient k [mm] Girder clip Track suport bracket Track support...

 Open the catalog to page 5
Cable trolleys for C1, C1A rail systems-6

Accessories for cable trolleys Girder clip LK-C11 Material: - galvanized steel - stainless steel A2 - stainless steel - galvanized steel - stainless steel A2 - stainless steel Girder clip LK-C20 Material: - galvanized steel - stainless steel A2 - stainless steel - galvanized steel - stainless steel A2 - stainless steel Swinging towing arm ZW1, ZW2 Material: ZW1 galvanized or stainless steel A2 ZW2 galvanized or powder coated steel - stainless steel

 Open the catalog to page 6
Cable trolleys for C1, C1A rail systems-7

Accessories for cable trolleys Akcesoria do prowadnic ceowych C1, C1A Mounting plate PM Material: - galvanized steel - stainless steel A2 The plate is used in case of ties between plastic cable trolleys * - please consult Catalog No. - stainless steel Mount with ball joint MPK Material: mount with ball joint - polyamide bolts, nuts - galvanized steel - stainless steel A2 - stainless steel Attention: Mount with ball joint is an integer part of round cable trolleys (page 13, 14) Rubber bumper ZG-01 is used to cushioning mutual impact of steel cable trolleys or/and to increase their length. Technical...

 Open the catalog to page 7
Cable trolleys for C1, C1A rail systems-8

Flat cable trolleys fortrolleys for rails Flat cable C1, C1A C1, C1A rails Plastic cable trolleys WKT-P1A (B,C,D) /... Material: trolley's body cable support - polyamide or polypropylene - polyamide or polypropylene Max. trolley's speed: 80 m/min Working temperature: - 30oC … + 80oC Type determinant Material of rollers / axle rollers – polyamide slide/ axle – stainless steel rollers – polyamide slide/ axle – stainless steel, polyamide pans rollers – covered rolling bearings / axle – galvanized steel rollers – covered rolling bearings: plastic outer ring, inner ring and axle – stainless steel...

 Open the catalog to page 8
Cable trolleys for C1, C1A rail systems-9

Flat cable trolleys for C1, C1A rails Steel cable trolleys WK-P1 (S) / …. trolley body cable support - dip galvanized steel or stainless steel A2 - polypropylene or polyamide, - galvanized steel or stainless steel A2 - covered rolling bearings - galvanized steel or stainless steel A2 rollers axles, bolts, nuts Max. trolley's speed: Working temperature: Trolley's max. load: S - in type designation - galvanized steel cable support Catalog No. - stainless steel Attention: Trolleys can be additionally equipped in 1 or 2 bumpers ZG-01 increasing it's length (page 7) Steel towing trolleys WKZ-P1 (S)...

 Open the catalog to page 9
Cable trolleys for C1, C1A rail systems-10

Flat cable trolleys for C1, C1A rails Cable trolleys WK-P1 (S) /160x72xD..., WK-P1 (S) /200x72xD... Material: trolley body cable support rollers bumpers axles, bolts, nuts - powder covered, galvanized steel - polypropylene or polyamide, - galvanized steel - covered rolling bearings - rubber - galvanized steel Max. trolley's speed: 80 m/min Working temperature: - 30oC … + 80oC Trolley's max. load: 20 kg S - in type designation galvanized steel cable support Catalog No. Other dimensions size are possible, please consult Towing trolleys WKZ-P1 (S) /160x72xD..., WKZ-P1 (S) /200x72xD... Material:...

 Open the catalog to page 10
Cable trolleys for C1, C1A rail systems-11

Flat cable trolleys for C1, C1A rails Cable trolleys WK-P1/160x72xD..., WK-P1/200x72xD... Material: trolley body cable support rollers bumpers axles, bolts, nuts Max. trolley's speed: Working temperature: Trolley's max. load: - powder covered, galvanized steel - powder covered, galvanized steel - covered rolling bearings - rubber - galvanized steel Other dimensions size are possible, please consult Towing trolleys WKZ-P1/160x135xD..., WKZ-P1/200x135xD... Material: trolley body cable support rollers bumpers axles, bolts, nuts Max. trolley's speed: Working temperature: Trolley's max. load: - powder...

 Open the catalog to page 11
Cable trolleys for C1, C1A rail systems-12

Special flat cable trolleys for C1, C1A rails Double support cable trolleys WK-P1/32-S1 Trolleys can be additionally equipped in 1 or 2 bumpers ZG-01 increasing it's length (page 7) Material: trolley body - dip galvanized steel cable support - polyamide, polypropylene rollers - covered rolling bearings axles, bolts, nuts - galvanized steel Max. trolley's speed: 80 m/min tel./fax. +48525810515 tel. +4852 5810530 [email protected] [email protected] www.unilift.pl ■ KC111-2012 EN

 Open the catalog to page 12

All UNILIFT catalogs and technical brochures

  1. Cable trolleys and accessories for C-rail system
    Cable trolleys and accessories for C-rail system

    44  Pages

  2. UNILIFT - conductor rails - MOBILIS
    UNILIFT - conductor rails - MOBILIS

    20  Pages

  3. UNILIFT - INFORMATION BROCHURE
    UNILIFT - INFORMATION BROCHURE

    8  Pages

  4. 4 - pole insulated conductor rails UNILIFT - ULA - 35A, 50A, 80A, 100A, 120A
    4 - pole insulated conductor rails UNILIFT - ULA - 35A, 50A, 80A, 100A, 120A

    24  Pages

  5. Cable festoons UNILIFT
    Cable festoons UNILIFT

    1  Page

  6. CABLE TROLLEYS FOR MONORAIL TRACK, CRANE RUNWAY, CRANE GIRDER
    CABLE TROLLEYS FOR MONORAIL TRACK, CRANE RUNWAY, CRANE GIRDER

    1  Page

  7. UNILIFT
    UNILIFT

    8  Pages

  8. PENDANT CONTROL STATIONS - UNILIFT-HY-NUX
    PENDANT CONTROL STATIONS - UNILIFT-HY-NUX

    20  Pages

  9. Cable trolleys for I-beam track - KDR
    Cable trolleys for I-beam track - KDR

    64  Pages

  10. Cable trolleys and accessories for C-rail system - C3
    Cable trolleys and accessories for C-rail system - C3

    28  Pages

  11. Cable trolleys and accessories for C-rail system - C2
    Cable trolleys and accessories for C-rail system - C2

    44  Pages

  12. Cable trolleys for I-beam track - KDF
    Cable trolleys for I-beam track - KDF

    56  Pages

  13. Cable trolleys and accessories for C-rail system - C1_C1A
    Cable trolleys and accessories for C-rail system - C1_C1A

    44  Pages

  14. 4 - pole insulated conductor rails UNILIFT - ULA - 35A, 50A, 80A, 100A
    4 - pole insulated conductor rails UNILIFT - ULA - 35A, 50A, 80A, 100A

    12  Pages

  15. Driving directions markers
    Driving directions markers

    1  Page

  16. Optical anti - collision device FUA-3
    Optical anti - collision device FUA-3

    1  Page

  17. Cable trolleys for I-beam track for round cables
    Cable trolleys for I-beam track for round cables

    44  Pages

  18. Cable trolleys for I-beam track for flat cables
    Cable trolleys for I-beam track for flat cables

    40  Pages

  19. Cable trolleys for C2 rail systems
    Cable trolleys for C2 rail systems

    20  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.