PARADIAN 50

PARADIAN 50

Product catalog summary
Description
PARADIAN 50 is a G11 type, blue-colored, ready-to-use coolant based on monoethylene glycol (MEG), suitable for sealed or unsealed cooling systems in cars, trucks, tractors, and earth-moving machines. It provides frost protection down to -40°C and is recommended for replacement every 5 years.
Advantages
  • Permanent coolant with no need for annual draining.
  • High alkalinity reserve for effective rust protection.
  • Non-corrosive to hoses, seals, and non-ferrous metals like copper and aluminum.
  • Free from ethanol and glycerin.
Performances
Complies with French Standard R 15-601 Type 3, used by many automobile and industrial vehicle manufacturers.
Properties
CharacteristicUnitsMethodsTypical Data
Colour--Blue-green
Density at 20°Ckg/m³NFR 15.602.11068
pH-NF T 781037 to 8.5
Alkalinity reserveml HCL (0.1 N) / 10 mlNF T 78101> 10
Refractive index-NFR 15.602.21.39
Boiling point°CNFR 15.602.4> 105
Freezing point°CNF T 78102- 36
Environment, Health & Safety
Disposal must comply with local regulations. Safety Data Sheet available upon request. Contains MEG, requiring statutory labeling for dangerous substances. Poisonous if ingested; keep out of reach of children, do not swallow, and avoid disposal in sewers or surface waters. Store in original packaging.
See more

Catalog excerpts

PARADIAN 50-1

BLUE COLORED READY-TO-USE COOLANT FOR ALL AUTOMOBILE COOLING SYSTEMS PARADIAN 50 is a ready-to-use coolant of the G11 type based on monoethylene glycol (MEG). The liquid can be used in sealed or unsealed cooling circuits of cars, trucks, tractors and earth-moving machines. This coolant offers protection against frost up to -40 ° C. It is recommended to change the coolant every 5 years. PARADIAN 50 is a permanent coolant which does not require annual draining of the cooling system, thanks to its excellent quality level. - High alkalinity reserve, providing efficient and durable rust protection. - No effect on hoses or seals. - No corrosive action on non-ferrous metals (copper and aluminum alloys). Does not attack welds. Paradian 50 is free of ethanol and glycerin. PARADIAN 50 meets the requirements of French Standard R 15-601 Type 3, used by many automobile and industrial vehicles manufacturers. Typical data are given for information only. Elimination after use must be made in conformity with the local rules in force about disposal. When needed, Safety Data Sheet can be obtained upon request. PARADIAN 50 does not contain nitrites or amines but is based on monoethylene glycol (MEG); therefore it is subject to statutory labelling for dangerous substances (poisonous if ingested). Keep out of reach of children, do not swallow, do not put into sewers or surface waters, keep it stored in original package. UNIL LUBRICANTS NV/SA | Bergensesteenweg 713 | B-1600 Sint-Pieters-Leeuw | Tel. +32 (0)2 365 02 00 | [email protected] | @UnilLubricants

 Open the catalog to page 1

All UNIL LUBRICANTS catalogs and technical brochures

  1. PTFE ULTRA

    2  Pages

  2. POLYFOOD

    2  Pages

  3. BLACK G

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.