Engineered solutions using quality components Smaller machine increases ergonomics HiLo cylinder - Maximum efficiency causing less heat Noiseless high-quality pump Full length of fittings crimped in one stroke increases product quality and production efficiency Lateral reinforcement optimizes overall tolerance Fixed 6- o‘clock die Workpiece does not move, making it easier to position laterally Increases productivity, driving up profitability Reduces risk for injuries Slide bearing technology No greasing improves cleanliness of machine and prolongs its lifetime Maximum productivity with very low maintenance costs Flaking cannot stick in grease, no risk of prematurely damaging the crimping head End product can be used in sanitary applications without cleaning 20% more capability for crimping stronger or more difficult couplings versus our competition’s equivalent crimpers Consistently accurate crimp result Pressure Force Monitoring PFM – Standard on all machines with C.2 Control Quality-enhancing option for series production. With PFM, the upper and lower pressure limits can be set by adjusting the tolerance values obtained from test pressing. Pressures outside these limits are output as errors. It is possible to let the machine switch off at a fixed upper or lower limit, thereby obtaining a higher process safety. This way you can display and record combinations of incorrect hose and fittings, skipped work stage, such as skiving of the hose or a poorly positioned hose-fitting connection. Achieve integrated quality control without any additional effort. We reserve the right to make technical changes without notice. Options are machine parts that can only be ordered while buying the machine. With their distinctive construction and high crimping force of up to 12000 kN, the HM 660, HM 665 and HM 1200 are one of UNIFLEX‘s powerhouses. They set the standard for quality and cost effectiveness. Using one of these models, you can easily crimp up to 12“ industrial hoses (according to the fi

Technical Data Additional Information Due to the long master dies, you can crimp virtually all types of fittings. HM 660 I HM 1200 HM 665 The fixed 6- o’clock die makes safe and low-force positioning of the workpiece possible, which improves cost effectiveness as well as safety. Technical data No grease: 20% less friction Type of dies Speed (mm/sec) Close Crimp Open * Layflat hoses with special dies. ** According to the fitting. Accessories C.2 Control: Accessories Customized software