HM450_HM480_HM495
2Pages

Engineered solutions using quality components Compact machine for ergonomic work HiLo cylinder - Maximum efficiency causing less heat Noiseless high-quality pump Long master dies to crimp all types of workpieces Full length of fittings crimped in one stroke increases product quality and production efficiency Fixed 6- o‘clock die Workpiece does not move, making it easier to position laterally Increases productivity, driving up profitability Reduces risk for injuries Slide bearing technology No greasing improves cleanliness of machine and prolongs its lifetime Maximum productivity with very low maintenance costs Flaking cannot stick in grease, no risk of prematurely damaging the crimping head End product can be used in sanitary applications without cleaning 20% more capability for crimping stronger or more difficult couplings versus our competition’s equivalent crimpers Consistently accurate crimp result Pressure Force Monitoring PFM – Standard on all machines with C.2 Control Quality-enhancing option for series production. With PFM, the upper and lower pressure limits can be set by adjusting the tolerance values obtained from test pressing. Pressures outside these limits are output as Package = Machine + PB Ø 17,20,24,28,32,40,44,50,57,71 + 237.239.2L2 + 245.237L + QDC 239.5 + QDS 239 B + Control C.2 errors. It is possible to let the machine switch off at a fixed upper or lower limit, thereby obtaining a higher process safety. This way you can display and record combinations of incorrect hose and fittings, skipped work stage, such as skiving of the hose or a poorly positioned hose-fitting connection. Achieve integrated quality control without any additional effort. Oil Cooler OC HM xxx We reserve the right to make technical changes without notice. Options are machine parts that can only be ordered while buying the machine. Due to their compact, all-round accessible construction, high level of user friendliness, and long service life, the HM 450, HM 480 and HM 495 set the standard for quality and cost effectiveness. The crimpers‘ particularly large opening stroke and the use of long master dies allow you to crimp all types of fittings and up to 12” industr

Technical Data Additional Information Due to the long master dies, you can crimp virtually all types of fittings. The machines are very compact and narrow for a better work environment. Speed (mm/sec) Close Crimp Open Noise level Drive Oil L x W x H (mm) Weight HiDS (High Pressure Pump Dynamic Suction) Special dies (reduced opening). * Pipe fittings without flange. Technical data