Piston Valves
12Pages

Piston Valves • Seatless Valve • Economic, easy to service • Leak-tight across ports and to atmosphere • No erosion of sealing surface • Saves energy, environment friendly • Maintenance free UNI KLINGER LIMITED - An ISO 9001:2000 Company

Compensation for thermal expansions Resilient Ring sealing principle- enhanced sealing area Unaffected by foregin matter in the The Piston Valve principle is a KLINGER idea. One of many ideas Which has achieved world-wide rec- ognition. Continuously modified and matched to modern requirements, the Piston Valve has proved itself by the millions throughout the world. Today we can say with pride that our group is the world's largest manufac- turer of valves, based on this design Principle. "KLINGER" Piston valve's performance is backed by the central The sealing system is astonish- ingly...

KLINGER Piston Valve KVN The valve rings are the heart of a Piston Valve. They are made from Kor-p, a material specially developed and exclusively used for th manu- facture of valve ring. Kor-P consists essentially of asbestos, a high quality KLINGER valve rings are not merely surface-graphited; the graph ite content extends throughout the ring. For this reason its outstanding self lubricating properties are re- tained throughout the ring's entire service life. Standard valves rings KFK I Kor-P cover the temperature range tures upto 400°C.,Kor-P is also used as upper valve ring. KLINGER...

Fig.A Fig.B Regulating Piston Regulating Lantern Bash Pneumatically Actuated Valve Electrically Actuated SPECIAL APPLICATION KUNGER PISTON VALVES with heating jacket are designed for use with viscous media or with media which solidify when cold. The jacket is of steel and may be used with steam or heat transfer oil for which steel piping is suitable. drain connection are provided on the heating jacket. Since considerable heating jacket when steam-heating is used, it is advisable to connect a steam trap to the drain connection of KUNGER Piston Valves, size 15-50 mm can be fitted with a...

MODEL: KVSN - Socket Weld Ends (all dimensions in mm) KLINGER PISTON VALVES NEED NEVER EVER BE SCRAPPED In view ol technical progress design and dimensions are subject to change without notice.

SIZES: 15mm - 50mm Flanged ends Belleville washers Threaded bush Stud bolt Upper valve ring Lower valve ring Belleville washers Lower valve ring SIZES: 65mm - 150mm Flanged ends Metal rina Upper valve ring Lantern bush Note: Threaded bush applicable in case of 150 NB only Upper valve ring KFK Lower valve ring Kor-P KLINGER PISTON VALVES NEED NEVER EVER BE SCRAPPED In view of technical progress design ami dimontlant an tabfect to change without notice.

Note; All dimensions given above are in mm KLINGER PISTON VALVES NEED NEVER EVER BE SCRAPPED In view of technical progress design anil dimensions are subject to change without notice.

SIZES 65-200 mm - Flanged ends Threaded bush Gland bush Belleville washers Upper valve ring Split bush Belleville washers Piston shaft Additional valve ring Back seat bush Lantern bush Lower valve ring Additional valve ring Upper valve ring Kor-P (Sealing against Lower valve ring Kor-P (Sealing across KLINGER PISTON VALVES NEED NEVER EVER BE SCRAPPED In view of technical progress design anil dimensions are subject to change without notice.

struction of klinger piston valves (piston area being large), higher torques will be required to operate (open I close)an unbalanced valve against an inlet pressure greater than Thereforejn balanced valve inlet media pressure is allowed act on the top of the piston thereby nullifying the inlet pressure acting at the bot- tom of the piston. However, stuffing box rings, made of the same material as main sealing rings are provided (maintaining Klinger's unique sealing principle) to seal the media to atmo-

Pressure & Temperature Limitations: Material: Cast steel to ASTMA 216 Gr. WCB. * Note: Not recommended for Prolonged use I exposure beyond 426°C Material: Cast stainless steel to ASTM A351Gr. CF8M * Note: Both graphs are indicative only. For specific requirements or PIT relations, please consult works. KLINGER PISTON VALVES NEED NEVER EVER BE SCRAPPED In view of technical progress design anil dimensions are subject to change without notice.

Upper valve ring May only be used as upper valve ring. Lower valve ring Also used as upper valve ring at VALVE RING DIMENSIONS: Note: All dimensions given above are in mm KLINGER PISTON VALVES NEED NEVER EVER BE SCRAPPED In view of technical progress design and dimensions are subject to change without notice.

ALWAYS USE HAND-WHEEL ONLY USE OF PIPES OR WRENCH WILL DAMAGE SPINDLE LUBRICATE SPINDLE REGULARY HOT TIGHTEN BONNET NUTS 1 HOUR AFTER STARTUP WHEN PRESSURE & TEMP. STABILISES "WITH VALVE IN CLOSED POSITION'. RETIGHTEN PERIODICAL!* WHEN VALVE IS SHUT, DO NOT EXCEED RECOMMENDED TORQUES FLUSH PIPE UNE BEFORE INSTALLATION AS WELD SLAGS AND OTHER MATTER CAN DAMAGE SEALING RINGS USE ONLY ORIGINAL KUNGER RINGS AND SPARES Also available: (IIKUNGER - Piston Valves Strainers -' T' Type U<L - STEAM TRAPS - Thermodynamic, Thermostatic, IBT, Ball Float Traps, I ' Y' Type STRAINERS I Forged Piston Valve,...