Compressed Non-Asbestos Fiber
2Pages

U<L UNI KLINGER LIMITED Tolerances Nominal Sheet Standard Size Width (mm) Length (mm) Reinforced Width (mm) Length (mm) Nominal Thickness Up to and including 0.5 mm Over 0.5 mm. Up to and including 1.0 mm Over 1.0 mm. Up to and including 2.0 mm Over 2.0 mm Tolerances Plus or Minus 0.05 mm Plus or Minus 0.10 mm Plus or Minus 0.15 mm Plus or Minus 0.20 mm Maximum variation within one sheet. 0.05 mm 0.10 mm 0.15 mm 0.20 mm All information and recommendations contained in this publication are to the best of our knowledge correct. Since conditions of use are beyond our conbol users must satisfy themselves that products are suitable for the intended processes and users. No warranty is given or implied in respect of information or recommendab'ons or that any use of products will not infringe rights belonging toother parties. We will not be liable for any loss or damage resulting in way from any reliance on this publication or from any goods manufactured by us. We reserve the rights to change product design and properties without notice. Nothing in this clause excludes, restricts or modifies any condition, warranty, right or remedy which is conferred on you by consumer legislation. Also available: (§$ KLINGER / U<L Fluid Sealing Division: Compressed Asbestos Gasket Sheeting umSIL Compressed Non-Asbestos Gasket Sheeting Full Range ol Cut Gaskets, Metal Jacketed Heat Exchanger Gaskets Non-Asbestos Gland Packing, Kammprofile Fluid Control Division: PISTON VALVES - Seatless & Glandless, Forged Piston Valves STEAM TRAPS - Thermodynamic, IBT, Ball Float, Thermostatic MANUAL & ACTUATED BALL & BUTTERFLY VALVES STRAINERS ‘ Y ’ Type / LEVEL GAUGES - Reilex, Transparent, Bicolor BELLOW SEALED VALVES UNISIL Non Asbestos Compressed Gasket Sheeting In view of technical progress designs and dimensions are subject to change without notice. U<L UNI KLINGER LIMITED (Fluid Sealing Division) A joint venture of the Neterwala group of companies and KLINGER AG. Switzerland. Sales Office: SCI, 5th FI., KohinoorEstate. Mumbai-Pune Highway, Khadki, Pune-411003. Tel.: 91-20-41023000 Fax: (020) 41023001 e-mail: salescso@uniklinger.com Website: www.uniklinger.com Factory : GAT No 1240, S No 140, Village Vadu Budruk, Koregaon Bhimajal. Shirur, Dist - Pune - 412 216. Tel.: (02137) 676900 Fax: (02137) 676928 e-mail: fsdworks@uniklinger.com Chennai: East Coast Centre, 5th Floor, 553, Mount Rd., Teyanampet, Chennai- 600 018. Tel.: 91-44-24345707 Fax:91-44-24343960, e-mail: saleschen@uniklinger.com Mumbai: A-204, Nagesh Co-op. Hsg. Soc., LBSMarg, Navapada, Thane-400 602. Tel. -.91-22-25421140 91-22-25440461 Fax:91-22-25440463 e-mail: salesmum@uniklinger.com New Delhi: 321, Ansal Chamber-ll, 6, Bhikaji Cama Place, New Delhi-110 066. Tel: 91-11-41658767 91-11-26193847 Fax:91-11-41658768 e-mail: salesdel@uniklinger.com Pune: Scl, 5th FI., KohinoorEst. Mumbai-Pune Highway, Khadki, Pune-411003 Tel.: 91-20-41023000 Fax:91-20-41023001 e-mail: salespune@uniklinger.com *Manufactured under license from Klinger Switzerland UNI KLINGER LI MITED. AN ISO 9001:2008 COMPANY

Operating Temp. Typical Guidelines application Typical Original properties Typical values Typical properties after fluid immersion Typical values Asbestos free universal Max. temperature 250 Deg C gasket material for general Max. temperature for steam 200 Deg C Gasket material for liquids and gases. Good chemical resistance against water and oil. Resistant to refrigerants. Low gas leakage. A good product to wide range of industrial applications. Available in metallic. Minimum tensile strength N/mm2 Specific gravity gm/CM3 Compressibility % Recovery % Stress...