Plastic Modular Belt Type 22% CS Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Curved Surface Surface opening: 22% Backflex radius: 23.0 mm (0.91 in) Pin diameter: 5 mm (0.20 in) Photo will be updated Belt material POM-DI W & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: Permissible tensile force (Belt/pin material) Belt width Belt weight (Belt/pin material) Number of wear strips (Min. No.) *Min. No. drive sprocket per shaft Additional standard belt widths are available in steps of 76.0 mm (2.99 in). Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in). Additional standard belt widths are available in steps of 76.0 mm (2.99 in). Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in). General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. Belt material: POM-DI 1100 N (247 lbf), PP 500 N (112 lbf), PE 500 N (112 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in). = Single Link STRAIGHT RUNNING

Accessories Flight Running direction Material & color Link size Indent both sides

Pilot bore Molded sprocket Molded sprocket Other sprocket sizes are available upon request Two-part sprocket are available upon request Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 12.7 mm (0.50 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni S-MPB. For more detailed sprocket...

Fabrication & service Transmission Belts Timing Belts Modular Belts Seamless Belts Conveyor Belts Expert advice, quality solutions and local service for all your belting needs www.ammeraalbeltech.com This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Ammeraal Beltech...