Plastic Modular Belt C Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening: Closed Backflex radius: 23.0 mm (0.91 in) Pin diameter: 5 mm (0.20 in) Belt material POM-DI W & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: Permissible tensile force (Belt/pin material) Belt width Belt weight (Belt/pin material) Number of wear strips (Min. No.) *Min. No. drive sprocket per shaft Additional standard belt widths are available in steps of 76.0 mm (2.99 in). Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in). Additional standard belt widths are available in steps of 76.0 mm (2.99 in). Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in). General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. Belt material: POM-DI 1100 N (247 lbf), PP 500 N (112 lbf), PE 500 N (112 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in). = Single Link STRAIGHT RUNNING

Belt material & color Rubber material & color Non Standard material and color: See uni Material and Color Overview. Accessories Flight Running direction Missing photo Indent both sides Link size Material & color Accessories Side Guard Running direction Material & color Ammeraal Beltech Modular A/S Minimum indent to outside of side guide: 14.0 mm (0.55 in). Increment 6.4 mm (0.25). Non Standard material and color: See uni Material and Color Overview. Backflex radius for Side Guide: 75.0 mm (2.95 in). Hjulmagervej 21, 7100 Vejle, DK Ammeraal Beltech tel: +45 75723100 fax: +45 Innovation & Service...

Belt material & color POM-DI Link size Bottom Guide Non Standard material and color: See uni Material and Color Overview. Accessories AmFlight Running direction Material & color Other Non Standard option: See uni AmFlight Overview. Running direction

Pilot bore Molded sprocket Pitch diameter Bore size Overall diameter Non standard material and color: See uni Material and Color Overview. Molded sprocket Other sprocket sizes are available upon request Two-part sprocket are available upon request Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 12.7 mm (0.50 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding...