uni-ACB-C
4Pages

{{requestButtons}}

Catalog excerpts

uni-ACB-C - 1

Plastic Modular Belt Series uni ACB Type Closed Ammeraal Beltech Innovation & Service in Belting Belt material & color POM NL Straight running belt Nominal pitch: 40.0 mm (1.57 in) Surface type: Flat Surface opening: Closed Backflex radius: 60.0 mm (2.36 in) Pin diameter: 6.0 mm (0.24 in) Pin and lock material & color /? PA6.6 B [3) pp Non standard material and color: See uni Material and Color Overview. Safety edges with orange or yellow edge links mounted on alternating pitches along both belt edges are optional. Alternative pin and lock systems and materials: Contact Customer Service. Additional standard belt widths are available in steps of 50.7 mm (2.00 in). Additional non-standard belt widths are available in steps of 16.9 mm (0.67 in). PITCH 40.0 MM/1.57 IN STRAIGHT RUNNING STANDARD Additional standard belt widths are available in steps of 50.7 mm (2.00 in). Additional non-standard belt widths are available in steps of 16.9 mm (0.67 in). Additional standard belt widths are available in steps of 50.7 mm (2.00 in). Additional non-standard belt widths are available in steps of 16.9 mm (0.67 in). General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. Belt material: POM-NL 8000 N (1799 lbf). □ = Single Link

Open the catalog to page 1
uni-ACB-C - 2

Accessories Top/Bottom Insert Contact area/wear surface of belt will incease from 25% to 49% by the use of inserts. Top/Bottom Insert EC insert in uni ACB 2% Rough type can be build in to uni ACB Closed to create an electrical conductive belt. Contact area/wear surface of belt will incease from 25% to 38% by the use of inserts. POM-EC and POX-FREC holds a surface resistivity of 1x106 Ohm according to IEC 60093/ASTM D257. Backflex radius when flights are used: 120.0 mm (4.72 in).

Open the catalog to page 2
uni-ACB-C - 3

Non standard material and color: Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of single tooth = 6.5 mm (0.25 in) Width of sprocket = 33.2 mm (1.31 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni ACB. For more detailed sprocket information. contact Customer Service.

Open the catalog to page 3
uni-ACB-C - 4

Fabrication & service Transmission Belts Timing Belts Modular Belts Seamless Belts Conveyor Belts Expert advice, quality solutions and local service for all your belting needs www.ammeraalbeltech.com This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Ammeraal...

Open the catalog to page 4

All Uni-chains catalogs and technical brochures

  1. Idler

    2 Pages

  2. uni JCB Y

    2 Pages

  3. uni S-MPB C

    4 Pages

  4. Uni CSB

    4 Pages

  5. Uni JCB

    4 Pages

  6. Chains

    172 Pages

  7. Belt catalog

    180 Pages

Archived catalogs

  1. CHAIN CATALOG

    125 Pages