Series uni Flex OSB Type 60% Open Radius 2.2

Product catalog summary

Specifications:
The sideflexing belt has a nominal pitch of 25.4 mm (1.00 in) and an open surface type with a 60% surface opening. The backflex radius is 30.0 mm (1.18 in), and the pin diameter is 4.0 mm (0.16 in). The minimum inside radius is R2.2 times the belt width.

Materials:
The belt material options include POM-D and PP, both in color B. The pin and lock material is PA6.6 in color B. Alternative materials for pins and locks include Snap Pin A1: PP W, PBT LG, and PA6.6 B.

Performance:
The general belt tolerance is +0/-0.4% at 23°C/73°F. The maximum load per drive sprocket for POM-D is 1000 N (223 lbf) and for PP is 550 N (123 lbf). The belt requires support rollers or flanged rollers at each edge.

Dimensions and Load Capacity:
The document provides detailed tables for permissible tensile force, belt weight, and the minimum number of drive sprockets per shaft for various belt widths ranging from 303 mm to 1454 mm. Additional standard and non-standard belt widths are available.

Sprocket Information:
Sprockets are available in various sizes, with specific dimensions provided for each. Non-standard materials and colors are available upon request. The document advises ensuring the correct sprocket position and sufficient shaft size for the load.

Design Guidelines:
The document includes design guidelines with minimum dimensions for various parameters relative to the belt width. It emphasizes that the information is subject to change due to continuous development.

Contact Information:
For more detailed information or assistance, contact Ammeraal Beltech Modular A/S at the provided phone numbers or email address. Their website is also available for further resources.

Catalog excerpts

Series uni Flex OSB Type 60% Open Radius 2.2-1

Datasheet: uni Flex L-ASB 60% Open Radius 2.2 Plastic Modular Belt uni Flex OSB 60% Open Radius 2.2 Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Open Surface opening: 60% Backflex radius: 30.0 mm (1.18 in) P in diameter: 4.0 mm (0.16 in) Min. inside radius: R2.2 x belt width Belt material & color Pin and lock material & color Alternative pin and lock materials: Snap Pin A1: PP W Permissible tensile force (Belt/pin material) Belt width Belt weight (Belt/pin material) Curve sections Straight sections Curve sections *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) SIDE FLEXING Non standard material and color: See uni Material and Color Overview. Additional standard belt widths are available in steps of 76.8 mm (3.02 in). Additional non-standard belt widths are available in steps of 25.6 mm (1.01 in). General belt tolerance is +0/-0.4% at 23°C/73°F. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. Belt material: POM-D 1000 N (223 lbf), PP 550 N (123 lbf). Belt needs support rollers or flanged rollers at each belt edge for support. = Single Link

Open the catalog to page 1

Series uni Flex OSB Type 60% Open Radius 2.2-2

Datasheet: uni Flex OSB 60% Open Radius 2.2 uni Flex OSB 65% Open Radius 2.2 W Belt width Overall diameter Pilot Bore Bore size Pitch diameter Machined sprocket Non standard material and color: See uni Material and Color Overview. uni Flex OSB 60% Open Radius 2.2/1406 Other sprocket sizes are available upon request Two-part sprocket are available upon request Other bore sizes are available upon request uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 14.0 mm (0.55 in) Width of sprocket = 30.0 mm (1.18 in) Max. load per sprocket shown does not take bore size into account....

Open the catalog to page 2

All Uni-chains catalogs and technical brochures

Archived catalogs

CHAIN CATALOG
125 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list