Chains
172Pages

{{requestButtons}}

Catalog excerpts

Chains - 1

Slat Top Plastic Chain uni 440 Slat Top Plastic Chain Side flexing chain Pitch: 19.1 mm (0.75 in) Backflex radius: 12.5 mm (0.5 in) Permissible tensile strength: POM material: 1100 N (247 lbf) All dimensions are for chains in POM material. Weight Material & color Non standard material and color: See uni Material and Color Overview. Non standard pin material: See uni Material and Color Overview. sIDE FLEXING

Open the catalog to page 1
Chains - 2

Pitch diameter Non standard material and color: See uni Material and Color Overview. Machined sprocket Please ensure that sufficient size shaft and keyway are chosen for corresponding load. Fabriation & service Other sprocket sizes are available upon request Width of tooth: 15.8 mm/0.60 in Width of sprocket: 25.0 mm/0.10 in uni Retainer Rings: See uni Retainer Ring data sheet Solid advice For all your belting needs Local stock & service www.ammeraalbeltech.com This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect...

Open the catalog to page 2
Chains - 3

Slat Top Plastic Chain P Slat Top Plastic Chain Straight running chain Pitch: 38.1 mm (1.50 in) Backflex radius: 75.0 mm (3.00 in) Permissible tensile strength: POM material: 2000 N (450 lbf) All dimensions are for chains in POM material. Material & color Non standard material and color: See uni Material and Color Overview. Non standart pin material: See uni Material and Color Overview. Accessories Rubber Top Width Link material Rubber material When ordering. please state the required distance between the Rubber Top. Other Non Standard rubber profiles: See uni Rubber Profile Overview....

Open the catalog to page 3
Chains - 4

Molded Cast Iron Pitch diameter Molded Cast Iron Pitch diameter Molded sprocket Cast iron sprocket Machined sprocket Non standard material and color: See uni Material and Color Overview. Please ensure that sufficient size shaft and keyway are chosen for corresponding load. Other sprocket sizes are available upon request Width of tooth: 42.3 mm/1.70 in Width of sprocket: 42.3 mm/1.70 in uni Retainer Rings: See uni Retainer Ring data sheet uni Idler: See uni Idler data sheet Solid advice For all your belting needs Local stock & service www.ammeraalbeltech.com This information is subject to...

Open the catalog to page 4
Chains - 5

Slat Top Plastic Chain uni 821 Slat Top Plastic Chain Straight running chain Pitch: 38.1 mm (1.50 in) Backflex radius: 75.0 mm (3.00 in) Permissible tensile strength: POM material 3000 N (674 lbf) All dimensions are for chains in POM material. Material & color Non standard material and color: See uni Material and Color Overview. Non standard pin material: See uni Material and Color Overview. Link material Rubber material When ordering, please state the required distance between the Rubber Top. Other Non Standard rubber profiles: See uni Rubber Profile Overview. STRAIGHT RUNNING

Open the catalog to page 5
Chains - 6

Molded Cast Iron Pitch diameter Molded Cast Iron Pitch diameter Molded sprocket Cast iron sprocket Machined sprocket Non standard material and color: See uni Material and Color Overview. Please ensure that sufficient size shaft and keyway are chosen for corresponding load. Other sprocket sizes are available upon request Width of tooth: 79.4 mm/3.13 in Width of sprocket: 49.4 mm/3.13 in uni Retainer Rings: See uni Retainer Ring data sheet Solid advice For all your belting needs Local stock & service www.ammeraalbeltech.com This information is subject to alteration due to continuous...

Open the catalog to page 6
Chains - 7

Slat Top Plastic Chain Type Slat Top Plastic Chain Straight running chain Pitch: 38.1 mm (1.50 in) Backflex radius: 75.0 mm (3.00 in) Permissible tensile strength: POM material: 2000 N (450 lbf) All dimensions are for chains in POM material Material & color STRAIGHT RUNNING Non standard material and color: See uni Material and Color Overview. Non standard pin material: See uni Material and Color Overview. Accessories Rubber Top Link material POM-LF BR Rubber material Z When ordering, please state the required distance between the Rubber Top. Other Non Standard rubber profiles: See uni...

Open the catalog to page 7
Chains - 8

Molded Cast Iron Pitch diameter Molded Cast Iron Pitch diameter Molded sprocket Cast iron sprocket Machined sprocket Non standard material and color: See uni Material and Color Overview. Please ensure that sufficient size shaft and keyway are chosen for corresponding load. Other sprocket sizes are available upon request Width of tooth: 42.3 mm/1.70 in Width of sprocket: 42.3 mm/1.70 in uni Retainer Rings: See uni Retainer Ring data sheet uni Idler: See uni Idler data sheet Solid advice For all your belting needs Local stock & service www.ammeraalbeltech.com This information is subject to...

Open the catalog to page 8
Chains - 9

Datasheet: uni 879 Super Flex Slat Top Plastic Chain uni 879 Super Flex Slat Top Plastic Chain Side flexing chain Pitch: 38.1 mm (1.50 in) Backflex radius: 75.0 mm (3.00 in) Permissible tensile strength: POM material: 2250 N (506 lbf) All dimensions are for chains in POM material. Recommended Material & color SIDE FLEXING When ordering, please state the required distance between the Rubber Top. Other Non Standard rubber profiles: See uni Rubber Profile Overview. Link material POM-LF BR Non standard material and color: See uni Material and Color Overview. Non standard pin material: See uni...

Open the catalog to page 9
Chains - 10

Datasheet: uni 879 Super Flex Molded Cast Iron Pitch diameter Molded Cast Iron Pitch diameter Molded sprocket Cast iron sprocket Molded two part sprocket Non standard material and color: See uni Material and Color Overview. Please ensure that sufficient size shaft and keyway are chosen for corresponding load. uni 879 Super Flex/1304 Fabriation & service Other sprocket sizes are available upon request Width of tooth: 15.8 mm/0.62 in Width of sprocket: 42.3 mm/1.67 in uni Retainer Rings: See uni Retainer Ring data sheet uni Idler: See uni Idler data sheet Solid advice For all your belting...

Open the catalog to page 10
Chains - 11

Slat Top Plastic Chain uni 879 Slat Top Plastic Chain Side flexing chain Pitch: 38.1 mm (1.50 in) Backflex radius: 75.0 mm (3.00 in) Permissible tensile strength: POM material: 2250 N (506 lbf) All dimensions are for chains in POM material. Weight Material & color SIDE FLEXING Link material Rubber material When ordering. please state the required distance between the Rubber Top. Other Non Standard rubber profiles: See uni Rubber Profile Overview. Non standard material and color: See uni Material and Color Overview. Non standard pin material: See uni Material and Color Overview.

Open the catalog to page 11

All Uni-chains catalogs and technical brochures

  1. uni-ACB-C

    4 Pages

  2. Idler

    2 Pages

  3. uni JCB Y

    2 Pages

  4. uni S-MPB C

    4 Pages

  5. Uni CSB

    4 Pages

  6. Uni JCB

    4 Pages

  7. Belt catalog

    180 Pages

Archived catalogs

  1. CHAIN CATALOG

    125 Pages