63.5 mm (2.50 in)
18Pages

Plastic Modular Belt Type M2 C Straight running belt Nominal pitch: 63.5 mm (2.50 in) Surface type: Flat Surface opening: Closed Backflex radius: 100.0 mm (3.90 in) Pin diameter: ø10 mm (0.39 in) Pin and lock material & color Belt material & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: Permissible tensile force (Belt/pin material) Belt width Belt weight (Belt/pin material) POM-NLAS/SS POM-NL/SS POM-NLAS/SS POM-NL/SS *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Return (pcs) Additional standard belt widths are available in steps of 100.1 mm (3.94 in.) Additional non-standard belt widths are available in steps of 33.4 mm (1.31 in.) Additional standard belt widths are available in steps of 100.1 mm (3.94 in.) Additional non-standard belt widths are available in steps of 33.4 mm (1.31 in.) General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request *Max. Load per Drive Sprocket. Belt material: POM-NLAS 6000 N (1349 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.) = Single Link STRAIGHT RUNNING

Curved Belt Material & color Link size Rubber Material & color Other Non Standard Rubber profiles: See uni Rubber Profile Overview. Accessories Flight Material & color Non Standard material and color: See uni Material and Color Overview. Link size

Pilot Bore Machined sprocket Molded sprocket Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 16.0 mm (0.63 in) Width of sprocket = 33.0 mm (1.30 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni XLB. For more detailed...

Fabriation & service Solid advice For all your belting needs Local stock & service www.ammeraalbeltech.com This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Ammeraal Beltech Modular A/S Hjulmagervej 21 DK-7100 Vejle T +45 7572 3100 F +45 7572 3348...

Plastic Modular Belt Type M2 Rough Straight running belt Nominal pitch: 63.5 mm (2.50 in) Surface type: Rough Top Surface opening: Closed Backflex radius: 100.0 mm (3.90 in) Pin diameter: ø10 mm (0.39 in) Pin and lock material & color Belt material & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: Permissible tensile force (Belt/pin material) Belt width Belt weight (Belt/pin material) *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Return (pcs) Additional standard belt widths are available in steps of...

Curved Belt Material & color Link size Rubber Material & color Other Non Standard Rubber profiles: See uni Rubber Profile Overview. Accessories Flight Material & color Non Standard material and color: See uni Material and Color Overview. Link size

Pilot Bore Machined sprocket Molded sprocket Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 16.0 mm (0.63 in) Width of sprocket = 33.0 mm (1.30 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni XLB. For more detailed...

Fabriation & service Solid advice For all your belting needs Local stock & service www.ammeraalbeltech.com This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Ammeraal Beltech Modular A/S Hjulmagervej 21 DK-7100 Vejle T +45 7572 3100 F +45 7572 3348...

Plastic Modular Belt Type M2 15% Rough Straight running belt Nominal pitch: 63.5 mm (2.50 in) Surface type: Rough Top Surface opening: 15% Backflex radius: 100.0 mm (3.90 in) Pin diameter: ø10 mm (0.39 in) Pin and lock material & color Belt material & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: Permissible tensile force (Belt/pin material) Belt width Belt weight (Belt/pin material) *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Return (pcs) Additional standard belt widths are available in steps of...

Curved Belt Material & color Link size Rubber Material & color Other Non Standard Rubber profiles: See uni Rubber Profile Overview. Accessories Flight Material & color Non Standard material and color: See uni Material and Color Overview. Link size

Pilot Bore Machined sprocket Molded sprocket Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 16.0 mm (0.63 in) Width of sprocket = 33.0 mm (1.30 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni XLB. For more detailed...