Plastic Modular Belt Type 18% Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 18% Backflex radius: 65.0 mm (2.60 in) P in diameter: ø8.0 mm (0.31 in) Pin and lock material & color Belt material & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: ***Permissible tensile force (Belt/pin material) Belt width PP-HW/ PP-HW Belt weight (Belt/pin material) PP-HW/SS *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Return (pcs) Additional standard belt widths are available in steps of 50.7 mm (2.00 in.) Additional standard belt widths are available in steps of 50.7 mm (2.00 in.) General belt tolerance is +0/-0.4% at 23°C/73°Fand 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. Belt material: PP-HW with snub roller 2000 N (450 lbf), PP-HW without snub roller 1250 N (281 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.) ***Load capacity per row of reinforcement links in the belt: 2500 N (562 lbf) ***Example: Belt with 8 rows of reinforcement links, permissible load is 8 x 2500 N (562 lbf) = 20000 N (4496 lbf) = Single Link STRAIGHT RUNNING

Accessories Flight / Non Standard uni MPB Flights in PP-HW LB fits the BLB belt and are available on request. Please see the uni MPB Flight datasheet for more information. Accessories Side Guard E Running direction Running direction Running direction Material & color Non Standard material and color: See uni Material and Color Overview. Backflex radius for Side Guard: 200.0 mm (7.90 in) Accessories Reinforcement Link Load capacity per row of reinforcement links in the belt. Maximum 19 rows per metre belt width. Example: If seven rows are installed the max. permissible load of the belt is 7 x 2500...

Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni BLB For more detailed sprocket information, contact Customer Service.

Fabriation & service Solid advice For all your belting needs Local stock & service www.ammeraalbeltech.com This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Ammeraal Beltech Modular A/S Hjulmagervej 21 DK-7100 Vejle T +45 7572 3100 F +45 7572 3348 [email protected]...

Plastic Modular Belt Type 22% Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 22% Backflex radius: 65.0 mm (2.60 in) P in diameter: ø8.0 mm (0.31 in) Missing photo Pin and lock material & color Belt material & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: ***Permissible tensile force (Belt/pin material) Belt width PP-HW/ PP-HW Belt weight (Belt/pin material) PP-HW/SS *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Return (pcs) Additional standard belt widths are available...

Accessories Flight / Non Standard uni MPB Flights in PP-HW LB fits the BLB belt and are available on request. Please see the uni MPB Flight datasheet for more information. Accessories Side Guard E Running direction Running direction Running direction Material & color Non Standard material and color: See uni Material and Color Overview. Backflex radius for Side Guard: 200.0 mm (7.90 in) Accessories Reinforcement Link Load capacity per row of reinforcement links in the belt. Maximum 19 rows per metre belt width. Example: If seven rows are installed the max. permissible load of the belt is 7 x 2500...

Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni BLB For more detailed sprocket information, contact Customer Service.

Overall diameter Bore size Molded square bore Non standard material and color: See uni Material and Color Overview. Molded round bore Other sprocket sizes are available upon request Two-part sprocket are available upon request Other bore sizes are available upon request uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 9.5 mm (0.37 in) Width of sprocket = 42.3 mm (1.67 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions...

Plastic Modular Belt Type 38% Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 38% Backflex radius: 65.0 mm (2.60 in) P in diameter: ø8.0 mm (0.31 in) Missing photo Belt material & color Pin and lock material & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: ***Permissible tensile force (Belt/pin material) Belt width PP-HW/ PP-HW Belt weight (Belt/pin material) PP-HW/SS *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Return (pcs) Additional standard belt widths are available...