Plastic Modular Belt 66% Straight running belt Nominal pitch: 27.9 mm (1.10 in) Surface type: Flat Surface opening: 66% Backflex radius: 40.0 mm (1.57 in) Pin diameter: ø4.0 mm (0.16 in) Belt material & color Travel in both directions is possible. uni-chains recommends this travel direction. mm Pin and lock material & color Non standard material and color: See uni Material and Color Overview. Pin: PA6.6 B PBT LG SS304 Alternative pin and lock materials: Permissible tensile force (Belt/pin material) *Belt width Belt weight (Belt/pin material) **Min. No. drive sprocket per shaft Number of wear strips (Min. No.) ***Carry (pcs) Standard Increments in belt width : 33.6 mm (1.32 in.) Standard Increments in belt width : 33.6 mm (1.32 in.) *The belt width in PA6.6 GFH is 1% wider than the belt width in the table **Max. Load per Drive Sprocket. Belt material: PA6.6 GFH 1200 N (270 lbf), PP 800 N (180 lbf) ***Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.) = Single Link STRAIGHT RUNNING

Accessories Tab/NON STANDARD Belt material & color Bottom Hold Down 2.50 The brand for plastic modular belts and chains Ammeraal Beltech Modular A/S Hjulmagervej 21, 7100 Vejle, DK tel: +45 75723100 fax: +45 75723348 Innovation & Service in Belting [email protected] www.unichains.com Ammeraal Beltech Non Standard material and color: See uni Material and Color Overview. Belt type: Pilot bore Bore size Overall diameter Non standard material and color: See uni Material and Color Overview. Machined sprocket Other sprocket sizes are available upon request. Two-part sprocket are available upon request....