12.7 mm (0.50 in)
22Pages

Plastic Modular Belt 37% Straight Running Nominal pitch: 12.7 mm (0.50 in) Surface type: Flat Surface opening: 37% B ackflex radius: 12.5 mm (0.49 in) Min flex diameter (nosebar): 19.1 mm (0.75 in) Pin diameter: ø4.0 mm (0.16 in) Belt material & color Pin material & color Non standard material and color: See uni Material and Color Overview. Alternative pin material: Permissible tensile force (Belt/pin material) Belt width Belt weight (Belt/pin material) Min No drive sprocket per haft * Number of wear strips (min no) Carry (pcs) Additional standard belt widths are available in steps of 77.0 mm (3.03 in.) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in.) Additional standard belt widths are available in steps of 77.0 mm (3.03 in.) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in.) General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. Belt material: POM-D 1500 N (337 lbf), PP 1000 N (225 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.) = Single Link STRAIGHT RUNNING

Belt material & color Rubber material & color Link size Other Non Standard Rubber profiles: See uni Rubber Profile Overview. Accessories Flight * rawing shows back side D of flight. Front side is flat * Photo shows back side of flight. Front side is flat Flat/Non Stick* Material & color Non standard material and color: See uni Material and Color Overview. Minimum indent is for uni M-TTB flight 0 mm. Increment: 25.4 mm (1.00 in). Link size

Side Guard Running direction Non standard Roller material and color: See uni Material and Color Overview Non standard uni AmFlight for uni M-TTB Principle sketch Other non standard option: See uni Amflight Overview

Overall diameter Pilot bore Bore size Molded sprocket Machined sprocket Non standard material and color: See uni Material and Color Overview. Machined sprocket Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 6.5 mm (0.26 in) Width of sprocket = Single row: 17.5 mm (0.69 in) Double row: 30.0 mm (1.18 in) Max load per sprocket shown does not take bore size into account. Please also...

Plastic Modular Belt 37% CS Straight Running Nominal pitch: 12.7 mm (0.50 in) Surface type: Curved Surface opening: 37% B ackflex radius: 12.5 mm (0.49 in) Min flex diameter (nosebar): 19.1 mm (0.75 in) Pin diameter: ø4.0 mm (0.16 in) Curved surface makes perfect circle when 25.4 mm (1.00 in) flex diameter is applied Belt material & color Non standard material and color: See uni Material and Color Overview. Alternative pin material: Permissible tensile force (Belt/pin material) Belt weight (Belt/pin material) Belt width Min No drive sprocket per haft * Number of wear strips (min no) Carry...

Belt material & color Rubber material & color Link size Other Non Standard Rubber profiles: See uni Rubber Profile Overview. Accessories Flight * rawing shows back side D of flight. Front side is flat. * hoto shows back side P of flight. Front side is flat. Flat/Non Stick* Material & color Non standard material and color: See uni Material and Color Overview. Minimum indent is for uni M-TTB flight 0 mm. Increment: 25.4 mm (1.00 in). Link size

Side Guard Running direction Non standard Roller material and color: See uni Material and Color Overview

Overall diameter Pilot bore Bore size Molded sprocket Machined sprocket Non standard material and color: See uni Material and Color Overview. Machined sprocket Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 6.5 mm (0.26 in) Width of sprocket = Single row: 17.5 mm (0.69 in) Double row: 30.0 mm (1.18 in) Max load per sprocket shown does not take bore size into account. Please also...

Plastic Modular Belt C Straight running belt Nominal pitch: 12.7 mm (0.50 in) Surface type: Flat Surface opening: Closed Backflex radius: 20.0 mm (0.80 in) Pin diameter: ø5 mm (0.20 in) Belt material & color Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: Permissible tensile force (Belt/pin material) Belt width POM-SFL/PP POM-EC/PP Belt weight (Belt/pin material) POM-SFL/PP POM-EC/PP Number of wear strips (Min. No.) *Min. No. drive sprocket per shaft Additional standard belt widths are available in steps of 76.3 mm (3,00 in.)...

Belt material & color Rubber material & color Non Standard material and color: See uni Material and Color Overview. Accessories Non Standard uni AmFlight Travel direction Other Non Standard option: See uni AmFlight Overview. Principle sketch

Molded sprocket Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni M-QNB For more detailed sprocket information, contact Customer Service.

Fabriation & service Solid advice For all your belting needs Local stock & service www.ammeraalbeltech.com This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Ammeraal Beltech Modular A/S Hjulmagervej 21 DK-7100 Vejle T +45 7572 3100 F +45 7572 3348...