UNEFLEX T
4Pages

UNE’S PRODUCT RANGE / UNEFLEX l n Uneflex T Series | Coupling for taper bush Coupling Size Nominal Torque [Nm] Max. Torque [Nm] dmax without Bush Mass Moment of Inertia, Joining Bush No. & Tyre No. Joining Bush No. 2 Inertia J [kgm ] (2) Mass [kg] (2) Tyre No. (1) The value of the bore with flat keyway only. If another keyway is required, see taper bush table to know the maximum diameter (2) The value of the complete coupling including taper bush with maximu

UNE’S PRODUCT RANGE / UNEFLEX Uneflex DVS Series | Coupling for taper bush Coupling Size dmax without Bush 8 8 19 20 n Mass Moment of Inertia, Joining Bush No. & Tyre No. Uneflex F Series | Coupling for taper bush F-40 dmax (1) dmax without Bush Screws K1 11 12 20 23 25 n Mass Moment of Inertia, Joining Bush No. & Tyre No. Coupling Size Nominal Torque [Nm] Max. Torque [Nm] Max. Speed [rpm] Diameter [mm] Joining Bush No. Inertia J [kgm2] (2) (1) The value of the bore with flat keyway only. If other keyway is required, see taper bush table to know maximum diameter (2) The value of the...

UNE’S PRODUCT RANGE / UNEFLEX Safety Mortises All Uneflex couplings are available with safety mortises. In case of a tyre rupture, the safety mortises act as a torsionally rigid transmission element, permitting a temporary emergency operation with limited torque free of backlash. For the installation of Uneflex couplings with safety mortises, an angle of 45° must exist between the mortises of the coupling hubs. Tightening Torque of the Screws M and T Series Coupling Size -1, DVA, DVS, SD, P and D Series Coupling Size K1 TA [Nm] SD Series K3 Thread Dimension

Cr. GI-2632 km7,8 20709 Ezkio (Guipúzcoa), Spain +34 943 72 07 65 comercial@grupooria.com www.eganagroup.com 01/21 | Subject to technical modifications