UNEFLEX P
UNEFLEX P
The document provides technical specifications for the Uneflex P Series couplings with brake drums, detailing various sizes and their corresponding mechanical properties such as nominal torque, maximum speed, and dimensions.
Specifications
- Coupling Sizes: Range from 14P-200 to 30P-710.
- Nominal Torque: Varies from 220 Nm to 8,500 Nm.
- Maximum Speed: Ranges from 1,250 rpm to 3,000 rpm.
- Dimensions: Includes diameter measurements (a, b, c, d1max, d2max) and lengths (m1, m2, etc.).
- Mass and Inertia: Mass ranges from 19 kg to 260 kg, with inertia values provided for each size.
- Screws: Specifications for screws (K1) used in assembly, including size and number.
Safety Features
All Uneflex couplings are equipped with safety mortises, which allow for emergency operation with limited torque in case of tyre rupture. Installation requires a 45° angle between the mortises of the coupling hubs.
Additional Series
The document also mentions other series such as M and T Series, DVA, DVS, SD, P, and D Series, with specific coupling sizes and tightening torque requirements.
Contact Information
For further inquiries, contact details for the manufacturer in Spain are provided.
Catalog excerpts
UNE’S PRODUCT RANGE / UNEFLEX q Uneflex P Series | Coupling with brake drum Coupling Size Nominal Torque [Nm] Max. Speed [rpm] Diameter [mm] Mass Moment of Inertia & Tyre No. Inertia J [kgm2] (1) (1) The value of the complete coupling
Open the catalog to page 1
UNE’S PRODUCT RANGE / UNEFLEX Safety Mortises All Uneflex couplings are available with safety mortises. In case of a tyre rupture, the safety mortises act as a torsionally rigid transmission element, permitting a temporary emergency operation with limited torque free of backlash. For the installation of Uneflex couplings with safety mortises, an angle of 45° must exist between the mortises of the coupling hubs. Tightening Torque of the Screws M and T Series Coupling Size -1, DVA, DVS, SD, P and D Series Coupling Size K1 TA [Nm] SD Series K3 Thread Dimension
Open the catalog to page 2
Cr. GI-2632 km7,8 20709 Ezkio (Guipúzcoa), Spain +34 943 72 07 65 [email protected] www.eganagroup.com 01/21 | Subject to technical modifications
Open the catalog to page 3All UNE catalogs and technical brochures
Lamaflex FLS Series1 Page
AP Serie1 Page
AD Serie1 Page
ACOFLEX AS1 Page
ACOFLEX AT1 Page
ACOFLEX A1 Page
UNEFLEX D4 Pages
UNEFLEX SD3 Pages
UNEFLEX FF2 Pages
UNEFLEX T4 Pages
UNEFLEX M4 Pages
- Flexible coupling
- Shaft shaft coupling
- Torque coupling
- Double-disc coupling
- Pump coupling
- Taper lock shaft coupling
- Jaw coupling
- Double coupling
- Torsionally rigid coupling
- Stainless steel coupling
- Large coupling
- Coupling with spacer
- Spring coupling
- Flywheel coupling
- Sliding coupling
- Coupling with braking wheel
- Coupling with brake disc