User manual and spare parts

WELCOME AS A UNDERHAUG CUSTOMER! Congratulations on purchasing a Globus product! Before using the equipment, we ask that you carefully read the user manual. You should keep this manual and pass it along if you sell the product to others. Underhaug manufactures a wide range of products, including stone pickers, stone rakes, seeders, round bale forks, pallet forks, harrows, Cambridge rollers, crosskill rollers, snow blowers, potato machines, excavation buckets, quick coupler attachments, and other construction equipment for excavators. If you would like to learn more about our products, you can...

User manual and spare parts snow blower GTF 2550 og GTF 2750 We hereby declare under our own responsibility that the following product: Type: Globus Snowblower GTF 2550 Year of Manufacture: 2024-> covered by this declaration, complies with the following standards:

User manual and spare parts snow blower GTF 2550 og GTF 2750 Adjustment of working depth/width 11 Replacing the wear blade 12 Lubrication points for the nozzle and swing ring 12 Lubrication points for the drivetrain 13 Wear blade and wear shoes 20

User manual and spare parts snow blower GTF 2550 og GTF 2750 2. SAFETY 2.1 User Manual All users of the Globus Snowblower GTF 2550 and GTF 2750 must familiarize themselves with the content of the user manual before using the machine. 2.2 Caution Ensure that no one is in the snowblower's throwing area. Snow, ice, stones, and other foreign objects thrown from the blower can cause damage to people, vehicles, buildings, and other objects. Adjust the throwing distance and direction using the speed, deflector, and nozzle rotation to avoid injury. 2.3 Risk of Pinching at the Nozzle If the nozzle becomes...

User manual and spare parts snow blower GTF 2550 og GTF 2750 Rotating parts. Read the user manual. Always remove the key from the ignition during repairs. 22.9 Lifting Points The snow blower body is equipped with lifting eyes marked with the symbol as illustrated. Please note that the GTF 2550 and GTF 2750 weigh approximately 1650 kg and 1750 kg, respectively. Always use straps rated for this total weight.

User manual and spare parts snow blower GTF 2550 og GTF 2750 3 PRODUCT INFORMATION 3.1 Intended Use The snow blower is supplied with an adapter for 3-point hitch attachment. The snow blower requires skilled operation, and the manual should be read before connecting and using, even if you have experience with similar machines. 3.2 Power Requirements The snow blower is designed for tractors with approximately 130 hp. The drive system is protected by clutches between the main gearbox and feed screws, as well as a shear bolt coupling on the power take-off shaft. 3.3 Construction and Features The...

User manual and spare parts snow blower GTF 2550 og GTF 2750

User manual and spare parts snow blower GTF 2550 og GTF 2750 Available additional equipment for the Globus GTF 2550 and GTF 2750 is listed below. Drawings and parts lists for each item can be found later in the manual.

User manual and spare parts snow blower GTF 2550 og GTF 2750 4. ASSEMBLY AND CONNECTION 4.1 Assembly The snow blower is delivered fully assembled and ready for use, unless otherwise agreed. For practical reasons during transportation, the chute may be delivered disassembled or lowered. The side blades are delivered unassembled for self-assembly unless otherwise agreed. If the side blades are to be installed, please refer to the parts list for detailed drawings. 4.2 Adapting the PTO Shaft Always use the PTO shaft provided with the machine. It is specifically designed to match the snow blower's...

User manual and spare parts snow blower GTF 2550 og GTF 2750 The snow blower is designed for a power take-off (PTO) that delivers 1000 rpm when mounted at the rear of the tractor. For front mounting, the snow blower is designed for a PTO that provides 540 rpm. However, it is recommended to use the reverse gearbox from the front mounting kit (available as an accessory) so that 1000 rpm is supplied to this gearbox. The driving speed and gear selection depend entirely on snow conditions and tractor type. The PTO should only be engaged at low engine speed. The working width of the snow blower can...

User manual and spare parts snow blower GTF 2550 og GTF 2750 6. MAINTENANCE 6.1 Retightening After a few hours of operation with a new snow blower, all bolt connections should be checked and retightened where necessary. This should then be checked regularly. 6.2 Replacing Wear Blades The main blade is reversible. The side wear blades can also be turned, requiring you to switch sides on them. When the wear blades are worn down on both sides, they must be replaced before the wear extends to the blower housing. The wear blades are bolted with M16x50 lock bolts, making them easy to replace. 6.3 Color...

User manual and spare parts snow blower GTF 2550 og GTF 2750 3. Lubrication Points - Drive System The gear oil used in the distribution gearbox, mounted between the augers and the discharge fan, should be Texaco Meropa 320 or oil with equivalent specifications from another brand. The oil should be changed for the first time after 20 hours of operation, and thereafter every 500 hours. Regardless of operating hours, the oil should be changed annually. Oil quantity: 5 litres. The power take-off shaft should be lubricated at 8-hour intervals. For all other lubrication points, use universal grease,...

User manual and spare parts snow blower GTF 2550 og GTF 2750 1. The warranty covers the repair of defects or malfunctions in the product or components included in the product. This applies to faults that can be traced back to production or material defects. 7.2 What is not covered by the warranty 1. The warranty does not cover third-party costs/consequences or operational downtime. 2. The warranty does not cover transportation of the product between the customer and the dealer for repairs. 3. The warranty does not cover consumables, including the PTO shaft. 4. Underhaug does not cover damage...