GTF 250-19 User manual and spare parts

WELCOME AS A UNDERHAUG CUSTOMER! Congratulations on purchasing a Globus product! Before using the equipment, we ask that you carefully read the user manual. You should keep this manual and pass it along if you sell the product to others. Underhaug manufactures a wide range of products, including stone pickers, stone rakes, seeders, round bale forks, pallet forks, harrows, Cambridge rollers, crosskill rollers, snow blowers, potato machines, excavation buckets, quick coupler attachments, and other construction equipment for excavators. If you would like to learn more about our products, you can...

DECLARATION OF CONFORMITY Producer: Torlandsveien 3 4365 Nærbø N-NORWAY We hereby declare under our own responsibility that the following product: Type: Serial No.: Year of Manufacture: covered by this declaration, complies with the following standards: • NS/EN ISO 13857: 2008 • NS/EN 13021: 2003 + A1: 2008 • NS/EN ISO 12100: 2010 • Directive 2006/42/EC ___________________________________ Sales manager Arild Høi

Adjusting of working dept/width 10 Replaceing ware parts 11 Lubrication points for the nozzle and swing ring 11 Lubrication points for the drive shaft 12 Warranty terms of Globus products 13 Wear blade and wear shoes 20

2 SAFETY 2.1 Instruction Manual Anyone using the Globus snow blower GTF 250-19 must familiarize themselves with the contents of the instruction manual before operating the machine. 2.2 Caution Ensure no people are in the snow blower’s discharge area. Snow, ice, stones, and other foreign objects ejected from the blower can cause injury to people, vehicles, buildings, and other objects. Adjust the throw distance and direction of the discharge stream by controlling the engine speed, lowering the chute, and swiveling the nozzle to avoid damage. Pay special attention when reversing to ensure no people...

Rotating parts. Read the user manual. When repairing, always remove the key from the ignition. 2.9 Lifting points The snow blower body is equipped with two lifting points as illustrated in the image. Be aware that the snow blower weighs approximately 900 kg, so always use straps rated for this total weight.

3 PRODUCT INFORMATION 3.1 Application The Globus GTF 250-19 is a two-stage snow blower suitable for tractors from 70 hp. The snow blower comes with a fixed 3-point hitch adapted to the applicable standards. The blower requires skilled operation, and the user manual should be read before connecting and operating the machine, even if the operator has prior experience with similar equipment. 3.2 Power Requirements The snow blower is designed for tractors from approximately 70 hp to 125 hp. The drive system is designed for a maximum power requirement of 125 hp, and it is very important that the shear...

Tekniske data Model Available optional equipment for the Globus GTF 250-19 is listed below. Drawings and parts lists for the individual items can be found further back in the manual. The snow blower is delivered fully assembled and ready for use unless otherwise agreed. For practical reasons during transport, the chute may be delivered either disassembled or lowered. The side cutter is supplied unassembled for self-installation unless otherwise agreed. If the side cutter needs to be installed, refer to the parts list for detailed drawings.

Always use the power take-off (P.T.O.) shaft that is supplied with the machine. It is adapted to the snow blower's power requirements and is equipped with a 12mm 8.8 shear bolt for overload protection. NB! It is extremely important that the P.T.O. shaft is adapted to the tractor/snow blower. Failure to do so can cause significant damage to both the tractor and/or the snow blower's gearbox. Some tractors have high-mounted P.T.O. shafts, which creates a large angle on the power take-off shaft, thus reducing the lifespan of the shaft. The angle should be as small as possible, ideally not exceeding...

• Clear the full width of the road during the first snowfall and create an even base. Do not wait until the snow depth becomes too large; instead, clear several times. • Choose a speed that ensures smooth progress, as this will make the job easier. • Do not use excessive force to throw the snow unnecessarily far; reduce the engine speed instead. This will make it easier and use less diesel. • If the snow blower clogs with wet snow, keep the engine speed up from the moment you enter the snow until the snow blower is emptied. • If the chute gets clogged with snow, stop the fan before cleaning,...

1. Chute The chute has 8 grease nipples and should be greased every 8 operating hours. Use universal grease, such as Statoil UniWay Li 712. 2. Drive shaft Gear oil Statoil GearWay 80W-90 (Change after 50 hours of operation, then every 200 hours or annually). Quantity: 1.8 liters. Other lubrication points: Universal grease Statoil UniWay Li 712.

7.1 What is covered by the warranty 1. The warranty covers the repair of defects and deficiencies in the product or components included in the product. This applies to faults that can be traced back to manufacturing or material defects. 7.2 What is not covered by the warranty 1. The warranty does not cover third-party costs/consequences or operational interruptions. 2. The warranty does not cover transportation of the product between the customer and the dealer for repairs. 3. The warranty does not cover wear parts, including the PTO shaft. 4. Underhaug does not cover damage caused by improper...

Wear blade and wear shoes

Additional Equipment

Maintenance schedule: Housing

WWW.UNDERHAUG.NO PRODUCER: Underhaug AS 4365 Nærbø N-NORWAY