GTF235 User manual and spare parts

WELCOME AS A UNDERHAUG CUSTOMER! Congratulations on purchasing a Globus product! Before using the equipment, we ask that you carefully read the user manual. You should keep this manual and pass it along if you sell the product to others. Underhaug manufactures a wide range of products, including stone pickers, stone rakes, seeders, round bale forks, pallet forks, harrows, Cambridge rollers, crosskill rollers, snow blowers, potato machines, excavation buckets, quick coupler attachments, and other construction equipment for excavators. If you would like to learn more about our products, you can...

DECLARATION OF CONFORMITY Producer: Torlandsveien 3 4365 Nærbø N-NORWAY We hereby declare under our own responsibility that the following product: Type: Serial No.: Year of Manufacture: covered by this declaration, complies with the following standards: • NS/EN ISO 13857: 2008 • NS/EN 13021: 2003 + A1: 2008 • NS/EN ISO 12100: 2010 • Directive 2006/42/EC ___________________________________ Sales manager Arild Høi

Adjustment of working depth/width 11 Replacing the wear parts 12 Lubrication points for the chute and swing ring 12 Lubrication points for the drivetrain 13 Wear blade and wear skids 20

2. SAFETY 2.1 User Manual All users of the Globus Snowblower GTF 235 must familiarize themselves with the content of the user manual before using the machine. 2.2 Caution Ensure that no one is in the snowblower's throwing area. Snow, ice, stones, and other foreign objects thrown from the blower can cause damage to people, vehicles, buildings, and other objects. Adjust the throwing distance and direction using the speed, deflector, and nozzle rotation to avoid injury. 2.3 Crushing hazard, chute If the chute becomes blocked with snow, always disengage the power take-off (PTO), stop the engine,...

Rotating parts. Read the user manual. Always remove the key from the ignition during repairs. 22.9 Lifting Points The snow blower body is equipped with lifting eyes marked with the symbol as illustrated. Please note that the GTF 2550 and GTF 2750 weigh approximately 1650 kg and 1750 kg, respectively. Always use straps rated for this total weight.

The Globus GTF 235-18 is a two-stage snow blower suitable for tractors from 70 hp. The snow blower is supplied with a fixed 3-point hitch designed to meet applicable standards. The machine requires skilled operation, and the user manual should be read before connection and operation, even if you have experience with similar machines. The snow blower is designed for tractors from approximately 70 hp up to 125 hp. The drive system is dimensioned for a maximum power requirement of 125 hp, and it is very important that the shear bolts on the drive system are not altered from the original dimensions,...

The snow blower is delivered fully assembled and ready for use, unless otherwise agreed. For practical reasons during transport, the chute may be delivered disassembled or laid down. The edge blades are delivered unassembled for self-assembly unless otherwise agreed. If the edge blades need to be installed, refer to the parts list for detailed drawings. Always use the power take-off (PTO) shaft supplied with the machine. It is designed to match the snow blower’s power requirements and is equipped with a 12mm 8.8 shear bolt for overload protection. Note! It is extremely important that the PTO...

The snow blower is designed for a power take-off that provides 540 rpm. Forward speed and gear selection depend entirely on snow conditions and tractor type. The P.T.O. should only be engaged at low engine speed. The working width of 235 cm can be adjusted by installing edge blades (see technical data 3.3). The depth of the blower is adjusted using the skid shoes, which have multiple settings to find the desired height. The wheels (see accessories 3.4) can be continuously adjusted with a mechanical link. The top link is used to adjust the angle of the snow blower. • Prepare the road well in advance...

6. MAINTENANCE 6.1 Retightening After a few hours of operation with a new snow blower, all bolt connections should be checked and retightened where necessary. This should then be checked regularly. 6.2 Replacing wear parts The main blade is reversible. The side wear blades can also be turned, requiring you to switch sides on them. When the wear blades are worn down on both sides, they must be replaced before the wear extends to the blower housing. The wear blades are bolted with M16x50 lock bolts, making them easy to replace. 6.3 Color code The paint color code is RAL 3000. Lubrication points...

2. Chute The chute has 8 grease nipples and should be lubricated every 8 operating hours. Use universal grease, such as Statoil Uniway Li 62. 3. Drive system Use gear oil Statoil GearWay 80W-90 (Change after 50 hours of operation, then every 200 hours or annually). Quantity: 1.8 liters. Other lubrication points: Universal grease Statoil UniWay Li 712. First time after 20h, afterwards every 500 hours Page 12

7.1 What is covered by the warranty 1. The warranty covers the repair of defects and faults in the product or its components. This includes faults that can be traced back to manufacturing or material defects. 7.2 What is not covered by the warranty 1. The warranty does not cover third-party costs/consequences or operational downtime. 2. The warranty does not cover transportation of the product between the customer and the dealer for repairs. 3. The warranty does not cover wear parts, including the PTO shaft. 4. Underhaug does not cover damage caused by misuse or overload beyond the product’s...

Wear skids and wear blades

Optional equipment

Swivel ring w/operation

Maintenance overview Bearing

WWW.UNDERHAUG.NO PRODUCER: UNDERHAUG AS 4365 Nærbø N-NORWAY