GSF 255-18 User manual and spare parts

WELCOME AS A UNDERHAUG CUSTOMER! Congratulations on purchasing a Globus product! Before using the equipment, we ask that you carefully read the user manual. You should keep this manual and pass it along if you sell the product to others. Underhaug manufactures a wide range of products, including stone pickers, stone rakes, seeders, round bale forks, pallet forks, harrows, Cambridge rollers, crosskill rollers, snow blowers, potato machines, excavation buckets, quick coupler attachments, and other construction equipment for excavators. If you would like to learn more about our products, you can...

DECLARATION OF CONFORMITY Producer: Torlandsveien 3 4365 Nærbø N-NORWAY We hereby declare under our own responsibility that the following product: Type: Serial No.: Year of Manufacture: covered by this declaration, complies with the following standards: • NS/EN ISO 13857: 2008 • NS/EN 13021: 2003 + A1: 2008 • NS/EN ISO 12100: 2010 • Directive 2006/42/EC ___________________________________ Sales manager Arild Hø

Adjustment of working depth/width 10 Replace wearing parts 12 Swivel ring / engine 23 Lubrication schedule and maintenance 28

User manual All users of the Globus Snowblower GTF 255 must familiarize themselves with the content of the user manual before using the machine. Ensure that no one is in the snowblower's throwing area. Snow, ice, stones, and other foreign objects thrown from the blower can cause damage to people, vehicles, buildings, and other objects. Adjust the throwing distance and direction using the speed, deflector, and nozzle rotation to avoid injury. Crushing hazard, chute If the chute becomes blocked with snow, always disengage the power take-off (PTO), stop the engine, and remove the key from the ignition...

Rotating parts. Read the user manual. When performing repairs, always remove the key from the ignition. Lifting points The snow blower body is equipped with three lifting points, marked with the symbol shown. Please note that a snow blower weighs approximately 1200 kg, so always use straps designed for this total weight.

The Globus GSF 255 is a robust and functional V-snow blower suitable for large tractors from 130 hp. The blower is supplied with a fixed three-point hitch, designed to meet current standards. The machine requires skilled operation, and the user manual should be read before connection and operation, even if the operator has prior experience with similar equipment. The Globus GSF 255 features a symmetrical blower housing. This means that the fan shaft is positioned in the centre of the blower, and the sidewalls are identical on both sides. Additionally, with a length of 220 cm, this design allows...

The available additional equipment for the Globus GSF 255 is listed below. Drawings and parts lists for the individual items can be found further back in the user manual.

The snow blower is delivered fully assembled and ready for use unless otherwise agreed. The GSF 255 comes standard with a fully hydraulic-operated chute, pre-assembled. Edge cutters can be supplied either loose or mounted, depending on practical reasons related to shipping, etc. If the edge cutter needs to be mounted, please refer to page 28 in the parts list for detailed drawings. Always use the power take-off shaft supplied with the machine. It is designed to match the snow blower's power requirements and is equipped with a 12mm 8.8 shear bolt to protect against overloads. Some tractors have...

The snow blower is designed for a power take-off (PTO) that operates at 540 RPM. The forward speed and gear selection depend entirely on snow conditions and the type of tractor. The PTO should only be engaged at low engine speed. The working width of the 255cm snow blower can be adjusted by mounting edge cutters (see technical data 3.3). The edge cutters on the right and left sides add approximately 20cm in width, thereby increasing the specified working width of the snow blower. The depth of the snow blower is adjusted with skid shoes that can be steplessly raised and lowered. An alternative...

After a few hours of operation with a new snow blower, all screw connections should be checked and tightened where necessary. This should then be checked regularly thereafter. Lubrication points 1. PTO The fan shaft is supported by two bearings, each with one grease nipple. Additionally, the PTO shaft is equipped with two grease nipples. These should be lubricated every 8 operating hours. Use universal grease, such as Statoil UniWay Li 712. 1. Swivel ring The swivel ring has a grease nipple and should be lubricated every 30 operating hours. Note! It is important to use special grease, Omega 66....

2. Chute The chute has 8 grease nipples and should be lubricated every 8 operating hours. Use universal grease, such as Statoil UniWay Li 712. 3. Fan blades Each fan blade has one grease nipple and should be lubricated every 8 operating hours. Use universal grease, such as Statoil UniWay Li 712. Replace wear blade Globus snow blowers are equipped with Hardox 500 wear plates, offering excellent wear resistance. The wear plates are reversible on both the left and right sides, as well as replaceable under the fan housing. When the wear plates are worn down on both sides, they should be replaced...

1. The warranty covers the repair of faults and defects in the product or components that are part of the product. This applies to defects that can be traced back to manufacturing or material defects. 1. The warranty does not cover third-party costs/consequences or downtime. 2. The warranty does not cover transportation of the product between the customer and the dealer for repair. 3. The warranty does not cover consumable parts, including the PTO shaft. 4. Underhaug does not cover damage caused by incorrect use or load beyond what the product is designed for. 1. The warranty is valid for 12...

Wear plate

Swivel ring / engine

WWW.UNDERHAUG.NO PRODUCER: Underhaug AS 4365 Nærbø N-NORWAY